Redis集群模式不仅提供可扩展性，还提供了高可用性，如果某个分片的master挂了，会自动从这个分片的slave中选取一个slave，接替master继续提供服务，这个选举过程与raft算法里的failover过程很相似。
Redis的failover分为两种，自动failover和手动failover
自动failover
在周期性函数ClusterCron中，如果发现给某个节点发送PING消息之后，该节点超过server.cluster_node_timeout的时间还没有回复PONG消息，就会给该节点打上CLUSTER_NODE_PFAIL标志，最后在clusterHandleSlaveFailover中尝试进行slave的failover:
1、首先slave判断master是否已经断联一段时间了
2、如果本次slave的failover超时，则设置下一次failover的时间，这个时间的设置也很有讲究：首先是固定的500ms+随机的500ms，用随机的500ms是为了避免这个分片的slave同时发送failover的投票请求，最后再加上每个slave的rank，salve的offset越大，也就是说这个slave与master同步的越多，这个slave的rank越大，也就能尽快发出failover投票请求，也就更容易成功当选为新的master
3、等待发送failover的投票请求
4、提升自己的currentepoch，并发送投票请求
5、如果集群中超过半数的master同意选举，则提升自己的configepoch，并设置自己为这个分片的master，继续提供服务
void clusterHandleSlaveFailover(void) {
...
/* Check if our data is recent enough according to the slave validity
* factor configured by the user.
*
* Check bypassed for manual failovers. */
// 检查master是否已经失联的时间超过阈值
if (server.cluster_slave_validity_factor &&
data_age >
(((mstime_t)server.repl_ping_slave_period * 1000) +
(server.cluster_node_timeout * server.cluster_slave_validity_factor)))
{
if (!manual_failover) {
clusterLogCantFailover(CLUSTER_CANT_FAILOVER_DATA_AGE);
return;
}
}
...
// 设置下一次failover的时间
/* If the previous failover attempt timedout and the retry time has
* elapsed,we can setup a new one. */
if (auth_age > auth_retry_time) {
server.cluster->failover_auth_time = mstime() +
500 + /* Fixed delay of 500 milliseconds,let FAIL msg propagate. */
random() % 500; /* Random delay between 0 and 500 milliseconds. */
server.cluster->failover_auth_count = 0;
server.cluster->failover_auth_sent = 0;
server.cluster->failover_auth_rank = clusterGetSlaveRank();
/* We add another delay that is proportional to the slave rank.
* Specifically 1 second * rank. This way slaves that have a probably
* less updated replication offset,are penalized. */
server.cluster->failover_auth_time +=
server.cluster->failover_auth_rank * 1000;
/* However if this is a manual failover,no delay is needed. */
if (server.cluster->mf_end) {
server.cluster->failover_auth_time = mstime();
server.cluster->failover_auth_rank = 0;
clusterDoBeforeSleep(CLUSTER_TODO_HANDLE_FAILOVER);
}
serverLog(LL_WARNING,
"Start of election delayed for %lld milliseconds "
"(rank #%d,offset %lld).",
server.cluster->failover_auth_time - mstime(),
server.cluster->failover_auth_rank,
replicationGetSlaveOffset());
/* Now that we have a scheduled election,broadcast our offset
* to all the other slaves so that they'll updated their offsets
* if our offset is better. */
clusterBroadcastPong(CLUSTER_BROADCAST_LOCAL_SLAVES);
return;
}
...
/* Return ASAP if we can't still start the election. */
// 等待failover请求的发送时间
if (mstime() < server.cluster->failover_auth_time) {
clusterLogCantFailover(CLUSTER_CANT_FAILOVER_WAITING_DELAY);
return;
}
/* Return ASAP if the election is too old to be valid. */
// 如果本次failover超时，则返回，等待下一次机会
if (auth_age > auth_timeout) {
clusterLogCantFailover(CLUSTER_CANT_FAILOVER_EXPIRED);
return;
}
...
// 提升自己的currentepoch，并发送投票请求
/* Ask for votes if needed. */
if (server.cluster->failover_auth_sent == 0) {
server.cluster->currentEpoch++;
server.cluster->failover_auth_epoch = server.cluster->currentEpoch;
serverLog(LL_WARNING,"Starting a failover election for epoch %llu.",
(unsigned long long) server.cluster->currentEpoch);
clusterRequestFailoverAuth();
server.cluster->failover_auth_sent = 1;
clusterDoBeforeSleep(CLUSTER_TODO_SAVE_CONFIG|
CLUSTER_TODO_UPDATE_STATE|
CLUSTER_TODO_FSYNC_CONFIG);
return; /* Wait for replies. */
}
// 如果集群中超过半数的master同意选举，则提升自己的configepoch，并设置自己为这个分片的master，继续提供服务
/* Check if we reached the quorum. */
if (server.cluster->failover_auth_count >= needed_quorum) {
/* We have the quorum,we can finally failover the master. */
serverLog(LL_WARNING,
"Failover election won: I'm the new master.");
/* Update my configEpoch to the epoch of the election. */
if (myself->configEpoch < server.cluster->failover_auth_epoch) {
// 提升自己的configepoch
myself->configEpoch = server.cluster->failover_auth_epoch;
serverLog(LL_WARNING,
"configEpoch set to %llu after successful failover",
(unsigned long long) myself->configEpoch);
}
/* Take responsibility for the cluster slots. */
clusterFailoverReplaceYourMaster();
} else {
clusterLogCantFailover(CLUSTER_CANT_FAILOVER_WAITING_VOTES);
}
}
通过clusterRequestFailoverAuth发起选举：
void clusterRequestFailoverAuth(void) {
unsigned char buf[sizeof(clusterMsg)];
clusterMsg *hdr = (clusterMsg*) buf;
uint32_t totlen;
// 构造选举消息，注意此时的curccurentepech已经++
clusterBuildMessageHdr(hdr,CLUSTERMSG_TYPE_FAILOVER_AUTH_REQUEST);
/* If this is a manual failover,set the CLUSTERMSG_FLAG0_FORCEACK bit
* in the header to communicate the nodes receiving the message that
* they should authorized the failover even if the master is working. */
if (server.cluster->mf_end) hdr->mflags[0] |= CLUSTERMSG_FLAG0_FORCEACK;
totlen = sizeof(clusterMsg)-sizeof(union clusterMsgData);
hdr->totlen = htonl(totlen);
// 向集群中所有节点广播消息
clusterBroadcastMessage(buf,totlen);
}
集群其他节点中收到这个slave的选取请求时，通过clusterSendFailoverAuthIfNeeded函数来判断是否给这个slave投票：
1、节点必须为master，且必须负责一定数量的slot
2、投票消息中的currentEpoch要大于该节点的currentEpoch
3、当前节点还没有投过票
4、对端节点必须是slave，并且对端节点的master在本节点看来是FAIL状态
5、该节点看来，对应的master达到了需要failover的时间
6、该节点的configepoch要小于等于对端节点的configepoch
void clusterSendFailoverAuthIfNeeded(clusterNode *node, clusterMsg *request) {
...
// 节点必须为master，且必须负责一定数量的slot
if (nodeIsSlave(myself) || myself->numslots == 0) return;
// 投票消息中的currentEpoch要大于该节点的currentEpoch
if (requestCurrentEpoch < server.cluster->currentEpoch) {
serverLog(LL_WARNING,
"Failover auth denied to %.40s: reqEpoch (%llu) < curEpoch(%llu)",
node->name,
(unsigned long long) requestCurrentEpoch,
(unsigned long long) server.cluster->currentEpoch);
return;
}
/* I already voted for this epoch? Return ASAP. */
// 当前节点还没有投过票
if (server.cluster->lastVoteEpoch == server.cluster->currentEpoch) {
serverLog(LL_WARNING,
"Failover auth denied to %.40s: already voted for epoch %llu",
node->name,
(unsigned long long) server.cluster->currentEpoch);
return;
}
// 对端节点必须是slave，并且对端节点的master在本节点看来是FAIL状态
/* Node must be a slave and its master down.
* The master can be non failing if the request is flagged
* with CLUSTERMSG_FLAG0_FORCEACK (manual failover). */
if (nodeIsMaster(node) || master == NULL ||
(!nodeFailed(master) && !force_ack))
{
if (nodeIsMaster(node)) {
serverLog(LL_WARNING,
"Failover auth denied to %.40s: it is a master node",
node->name);
} else if (master == NULL) {
serverLog(LL_WARNING,
"Failover auth denied to %.40s: I don't know its master",
node->name);
} else if (!nodeFailed(master)) {
serverLog(LL_WARNING,
"Failover auth denied to %.40s: its master is up",
node->name);
}
return;
}
// 该节点看来，对应的master达到了需要failover的时间
/* We did not voted for a slave about this master for two
* times the node timeout. This is not strictly needed for correctness
* of the algorithm but makes the base case more linear. */
if (mstime() - node->slaveof->voted_time < server.cluster_node_timeout * 2)
{
serverLog(LL_WARNING,
"Failover auth denied to %.40s: "
"can't vote about this master before %lld milliseconds",
(long long) ((server.cluster_node_timeout*2)-
(mstime() - node->slaveof->voted_time)));
return;
}
// 该节点的configepoch要小于等于对端节点的configepoch
/* The slave requesting the vote must have a configEpoch for the claimed
* slots that is >= the one of the masters currently serving the same
* slots in the current configuration. */
for (j = 0; j < CLUSTER_SLOTS; j++) {
if (bitmapTestBit(claimed_slots, j) == 0) continue;
if (server.cluster->slots[j] == NULL ||
server.cluster->slots[j]->configEpoch <= requestConfigEpoch)
{
continue;
}
/* If we reached this point we found a slot that in our current slots
* is served by a master with a greater configEpoch than the one claimed
* by the slave requesting our vote. Refuse to vote for this slave. */
serverLog(LL_WARNING,
"Failover auth denied to %.40s: "
"slot %d epoch (%llu) > reqEpoch (%llu)", j,
(unsigned long long) server.cluster->slots[j]->configEpoch,
(unsigned long long) requestConfigEpoch);
return;
}
// 最后为该节点投票
/* We can vote for this slave. */
server.cluster->lastVoteEpoch = server.cluster->currentEpoch;
node->slaveof->voted_time = mstime();
clusterDoBeforeSleep(CLUSTER_TODO_SAVE_CONFIG|CLUSTER_TODO_FSYNC_CONFIG);
clusterSendFailoverAuth(node);
serverLog(LL_WARNING, "Failover auth granted to %.40s for epoch %llu",
node->name, (unsigned long long) server.cluster->currentEpoch);
...
}
最后如果slave选举成功，通过clusterFailoverReplaceYourMaster函数来向集群中其他节点标明，自己已经成功当选master了，并且将会负责之前master的slot，继续提供服务：
void clusterFailoverReplaceYourMaster(void) {
int j;
clusterNode *oldmaster = myself->slaveof;
if (nodeIsMaster(myself) || oldmaster == NULL) return;
/* 1) Turn this node into a master. */
clusterSetNodeAsMaster(myself);
replicationUnsetMaster();
/* 2) Claim all the slots assigned to our master. */
for (j = 0; j < CLUSTER_SLOTS; j++) {
if (clusterNodeGetSlotBit(oldmaster,j)) {
clusterDelSlot(j);
clusterAddSlot(myself,j);
}
}
/* 3) Update state and save config. */
clusterUpdateState();
clusterSaveConfigOrDie(1);
/* 4) Pong all the other nodes so that they can update the state
* accordingly and detect that we switched to master role. */
// 广播一条消息，标明自己当选master
clusterBroadcastPong(CLUSTER_BROADCAST_ALL);
/* 5) If there was a manual failover in progress,clear the state. */
resetManualFailover();
}
手动failover
手动failover指的是主动发送命令强制某个分片的slave替换为master，命令为: Cluster FAILOVER [force|takeover]，其中takeover会立即执行failover，slave替换master提供服务，force表示slave可以立即发起选取，等集群中大多数master同意之后，就可以替换master提供服务，如果没有这两个选项，那么slave要等待offset追上master，然后再发起选举：
void clusterCommand(client *c) {
if (!strcasecmp(c->argv[1]->ptr,"failover") &&
(c->argc == 2 || c->argc == 3))
{
if (takeover) {
/* A takeover does not perform any initial check. It just
* generates a new configuration epoch for this node without
* consensus,claims the master's slots,and broadcast the new
* configuration. */
serverLog(LL_WARNING,"Taking over the master (user request).");
// 提升configepech
clusterBumpConfigEpochWithoutConsensus();
// 强制提升自己为master
clusterFailoverReplaceYourMaster();
} else if (force) {
/* If this is a forced failover,we don't need to talk with our
* master to agree about the offset. We just failover taking over
* it without coordination. */
serverLog(LL_WARNING,"Forced failover user request accepted.");
// 设置manualFailover开始
server.cluster->mf_can_start = 1;
} else {
serverLog(LL_WARNING,"Manual failover user request accepted.");
clusterSendMFStart(myself->slaveof);
}
addReply(c,shared.ok);
}
}
节点收到命令之后，在周期性函数ClusterCron中执行manualfailover:
void clusterCron(void) {
...
// 检查manualfailover是否超时
manualFailoverCheckTimeout();
if (nodeIsSlave(myself)) {
clusterHandleManualFailover();
if (!(server.cluster_module_flags & CLUSTER_MODULE_FLAG_NO_FAILOVER))
clusterHandleSlaveFailover();
/* If there are orphaned slaves,and we are a slave among the masters
* with the max number of non-failing slaves,consider migrating to
* the orphaned masters. Note that it does not make sense to try
* a migration if there is no master with at least *two* working
* slaves. */
if (orphaned_masters && max_slaves >= 2 && this_slaves == max_slaves)
clusterHandleSlaveMigration(max_slaves);
}
...
}
在clusterHandleManualFailover中，如果发现slave的offset已经追上master了，就可以进行failover：
void clusterHandleManualFailover(void) {
/* Return ASAP if no manual failover is in progress. */
// 没有manualfailover需求
if (server.cluster->mf_end == 0) return;
/* If mf_can_start is non-zero,the failover was already triggered so the
* next steps are performed by clusterHandleSlaveFailover(). */
// 已经进行manualfailover了
if (server.cluster->mf_can_start) return;
if (server.cluster->mf_master_offset == 0) return; /* Wait for offset... */
// offset追上master之后，设置server.cluster->mf_can_start为1，进行manualfailover
if (server.cluster->mf_master_offset == replicationGetSlaveOffset()) {
/* Our replication offset matches the master replication offset
* announced after clients were paused. We can start the failover. */
server.cluster->mf_can_start = 1;
serverLog(LL_WARNING,
"All master replication stream processed,"
"manual failover can start.");
}
}
具体的failover流程同样在clusterHandleSlaveFailover中实现，如果此时可以进行manualfailover，则进行failover：
void clusterHandleSlaveFailover(void) {
...
if (nodeIsMaster(myself) ||
myself->slaveof == NULL ||
(!nodeFailed(myself->slaveof) && !manual_failover) ||
(server.cluster_slave_no_failover && !manual_failover) ||
myself->slaveof->numslots == 0)
{
/* There are no reasons to failover,so we set the reason why we
* are returning without failing over to NONE. */
server.cluster->cant_failover_reason = CLUSTER_CANT_FAILOVER_NONE;
return;
}
...
}
原文地址：https://blog.csdn.net/yh88623131/article/details/125573769
版权声明：本文内容由互联网用户自发贡献，该文观点与技术仅代表作者本人。本站仅提供信息存储空间服务，不拥有所有权，不承担相关法律责任。如发现本站有涉嫌侵权/违法违规的内容， 请发送邮件至 dio@foxmail.com 举报，一经查实，本站将立刻删除。