3550支持3层和2层链路聚合,支持协议lacp(IEEE)和pagp(思科私有);而2950只支持pagp。故只能使用pagp.在配置2层链路聚合时候,组成port-channel接口的以太口下配置都得一致。
配置命令:
================================
3550:
enable
conf t
int range f0/9 - 10
no shut
switchport mode trunk encapsulation dot1q
switch mode trunk allow vlan add 100,10-13
channel-protocol pagp <pagp/lacp>
channel-group 1 mode on <1-64>
exit
interface port-channel 1
no shutdown
switchport mode trunk encapsulation dot1q
switchport trunk allow vlan 100,10-13
=================================
2950:
en conf t int range f0/9 - 10 no shut switchport mode trunk encapsulation dot1q switch mode trunk allow vlan add 100,10-13 channel-protocol pagp <pagp/lacp> channel-group 1 mode on<1-6> exit interface port-channel 1 no shutdown switchport mode trunk encapsulation dot1q switchport trunk allow vlan 100,10-13
版权声明:本文内容由互联网用户自发贡献,该文观点与技术仅代表作者本人。本站仅提供信息存储空间服务,不拥有所有权,不承担相关法律责任。如发现本站有涉嫌侵权/违法违规的内容, 请发送邮件至 dio@foxmail.com 举报,一经查实,本站将立刻删除。