centos搭建LAMP

分类：Mariadb作者：编程之家用户

实验环境：

[root@nmserver-7 html]# cat  /etc/redhat-release 
CentOS release 7.3.1611 (AltArch) 
[root@nmserver-7 html]# uname -a
Linux nmserver-7.test.com 3.10.0-514.el7.centos.plus.i686 #1 SMP Wed Jan 25 12:55:04 UTC 2017 i686 i686 i386 GNU/Linux

1、安装apache

　　1.1 安装apache

[root@nmserver-7 ~]# yum install httpd httpd-devel

　　1.2 启动apache服务

[root@nmserver-7 ~]# systemctl start  httpd

　　1.3 设置httpd服务开机启动

[root@nmserver-7 ~]# systemctl enable  httpd
Created symlink from /etc/systemd/system/multi-user.target.wants/httpd.service to /usr/lib/systemd/system/httpd.service.

　　1.4 查看服务状态

复制代码

[root@nmserver-7 ~]# systemctl status httpd
● httpd.service - The Apache HTTP Server
   Loaded: loaded (/usr/lib/systemd/system/httpd.service; enabled; vendor preset: disabled)
   Active: active (running) since 五 2017-07-21 17:21:37 CST; 6min ago
     Docs: man:httpd(8)
           man:apachectl(8)
 Main PID: 2449 (httpd)
   Status: "Total requests: 11; Current requests/sec: 0; Current traffic:   0 B/sec"
   CGroup: /system.slice/httpd.service
           ├─2449 /usr/sbin/httpd -DFOREGROUND
           ├─2450 /usr/sbin/httpd -DFOREGROUND
           ├─2451 /usr/sbin/httpd -DFOREGROUND
           ├─2452 /usr/sbin/httpd -DFOREGROUND
           ├─2453 /usr/sbin/httpd -DFOREGROUND
           ├─2454 /usr/sbin/httpd -DFOREGROUND
           ├─2493 /usr/sbin/httpd -DFOREGROUND
           ├─2494 /usr/sbin/httpd -DFOREGROUND
           └─2495 /usr/sbin/httpd -DFOREGROUND

7月 21 17:21:35 nmserver-7.test.com systemd[1]: Starting The Apache HTTP Server...
7月 21 17:21:36 nmserver-7.test.com httpd[2449]: AH00558: httpd: Could not reliably determine the server's fully q...ssage
7月 21 17:21:37 nmserver-7.test.com systemd[1]: Started The Apache HTTP Server.
Hint: Some lines were ellipsized, use -l to show in full.

复制代码

　　1.5 防火墙设置开启80端口

[root@nmserver-7 ~]# firewall-cmd --permanent --zone=public  --add-service=http
success
[root@nmserver-7 ~]# firewall-cmd --permanent --zone=public  --add-service=https
success
[root@nmserver-7 ~]# firewall-cmd --reload
success

　　1.6确认80端口监听中

复制代码

[root@nmserver-7 ~]# netstat -tulp
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       PID/Program name    
tcp        0      0 0.0.0.0:ssh             0.0.0.0:*               LISTEN      1084/sshd           
tcp        0      0 localhost:smtp          0.0.0.0:*               LISTEN      1486/master         
tcp6       0      0 [::]:ssh                [::]:*                  LISTEN      1084/sshd           
tcp6       0      0 localhost:smtp          [::]:*                  LISTEN      1486/master         
tcp6       0      0 [::]:http               [::]:*                  LISTEN      2449/httpd          
udp        0      0 localhost:323           0.0.0.0:*                           592/chronyd         
udp6       0      0 localhost:323           [::]:*                              592/chronyd

复制代码

　　1.8 查服务器IP

复制代码

[root@nmserver-7 ~]# ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen 1
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: ens33: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
    link/ether 00:0c:29:56:bc:cf brd ff:ff:ff:ff:ff:ff
    inet 192.168.8.9/24 brd 192.168.8.255 scope global ens33
       valid_lft forever preferred_lft forever
    inet6 fe80::20c:29ff:fe56:bccf/64 scope link 
       valid_lft forever preferred_lft forever
3: bridge0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN qlen 1000
    link/ether ea:89:d5:c7:32:73 brd ff:ff:ff:ff:ff:ff

复制代码

　　1.9 浏览器登陆

 

2、安装mysql

　　2.1安装mysql

[root@nmserver-7 ~]# yum install mariadb mariadb-server mariadb-libs mariadb-devel

 

root@nmserver-7 ~]# rpm -qa |grep maria
mariadb-libs-5.5.52-1.el7.i686
mariadb-5.5.52-1.el7.i686
mariadb-server-5.5.52-1.el7.i686
mariadb-devel-5.5.52-1.el7.i686

 

　　2.2 开启mysql服务，并设置开机启动，检查mysql状态

复制代码

[root@nmserver-7 ~]# systemctl start  mariadb 
[root@nmserver-7 ~]# systemctl enable  mariadb 
Created symlink from /etc/systemd/system/multi-user.target.wants/mariadb.service to /usr/lib/systemd/system/mariadb.service.
[root@nmserver-7 ~]# systemctl status  mariadb 
● mariadb.service - MariaDB database server
   Loaded: loaded (/usr/lib/systemd/system/mariadb.service; enabled; vendor preset: disabled)
   Active: active (running) since 六 2017-07-22 21:19:20 CST; 21s ago
 Main PID: 9603 (mysqld_safe)
   CGroup: /system.slice/mariadb.service
           ├─9603 /bin/sh /usr/bin/mysqld_safe --basedir=/usr
           └─9760 /usr/libexec/mysqld --basedir=/usr --datadir=/v...

7月 22 21:19:15 nmserver-7.test.com mariadb-prepare-db-dir[9524]: ...
7月 22 21:19:15 nmserver-7.test.com mariadb-prepare-db-dir[9524]: ...
7月 22 21:19:15 nmserver-7.test.com mariadb-prepare-db-dir[9524]: ...
7月 22 21:19:15 nmserver-7.test.com mariadb-prepare-db-dir[9524]: ...
7月 22 21:19:15 nmserver-7.test.com mariadb-prepare-db-dir[9524]: ...
7月 22 21:19:15 nmserver-7.test.com mariadb-prepare-db-dir[9524]: ...
7月 22 21:19:15 nmserver-7.test.com mariadb-prepare-db-dir[9524]: ...
7月 22 21:19:16 nmserver-7.test.com mysqld_safe[9603]: 170722 21...
7月 22 21:19:16 nmserver-7.test.com mysqld_safe[9603]: 170722 21...
7月 22 21:19:20 nmserver-7.test.com systemd[1]: Started MariaDB ...

复制代码

 

复制代码

[root@nmserver-7 ~]# netstat -tulp
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       PID/Program name    
tcp        0      0 0.0.0.0:ssh             0.0.0.0:*               LISTEN      1084/sshd           
tcp        0      0 0.0.0.0:mysql           0.0.0.0:*               LISTEN      9760/mysqld         
tcp6       0      0 [::]:ssh                [::]:*                  LISTEN      1084/sshd           
tcp6       0      0 [::]:http               [::]:*                  LISTEN      2449/httpd          
udp        0      0 localhost:323           0.0.0.0:*                           592/chronyd         
udp6       0      0 localhost:323           [::]:*                              592/chronyd

复制代码

　　2.3 数据库安全设置

复制代码

[root@nmserver-7 ~]# mysql_secure_installation 

NOTE: RUNNING ALL PARTS OF THIS SCRIPT IS RECOMMENDED FOR ALL MariaDB
      SERVERS IN PRODUCTION USE!  PLEASE READ EACH STEP CAREFULLY!

In order to log into MariaDB to secure it, we'll need the current
password for the root user.  If you've just installed MariaDB, and
you haven't set the root password yet, the password will be blank,
so you should just press enter here.

Enter current password for root (enter for none): 
OK, successfully used password, moving on...

Setting the root password ensures that nobody can log into the MariaDB
root user without the proper authorisation.

Set root password? [Y/n] y
New password: 
Re-enter new password: 
Password updated successfully!
Reloading privilege tables..
 ... Success!


By default, a MariaDB installation has an anonymous user, allowing anyone
to log into MariaDB without having to have a user account created for
them.  This is intended only for testing, and to make the installation
go a bit smoother.  You should remove them before moving into a
production environment.

Remove anonymous users? [Y/n] y
 ... Success!

Normally, root should only be allowed to connect from 'localhost'.  This
ensures that someone cannot guess at the root password from the network.

Disallow root login remotely? [Y/n] n
 ... skipping.

By default, MariaDB comes with a database named 'test' that anyone can
access.  This is also intended only for testing, and should be removed
before moving into a production environment.

Remove test database and access to it? [Y/n] y
 - Dropping test database...
 ... Success!
 - Removing privileges on test database...
 ... Success!

Reloading the privilege tables will ensure that all changes made so far
will take effect immediately.

Reload privilege tables now? [Y/n] y
 ... Success!

Cleaning up...

All done!  If you've completed all of the above steps, your MariaDB
installation should now be secure.

Thanks for using MariaDB!

复制代码

 

　　2.4 登陆数据库测试

复制代码

[root@nmserver-7 ~]# mysql -uroot -p
Enter password: 
Welcome to the MariaDB monitor.  Commands end with ; or \g.
Your MariaDB connection id is 11
Server version: 5.5.52-MariaDB MariaDB Server

Copyright (c) 2000, 2016, Oracle, MariaDB Corporation Ab and others.

Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.

MariaDB [(none)]> show databases;
+--------------------+
| Database           |
+--------------------+
| information_schema |
| mysql              |
| performance_schema |
+--------------------+
3 rows in set (0.02 sec)

MariaDB [(none)]>

复制代码

 

3、安装PHP

　　3.1 安装php

[root@nmserver-7 ~]# yum -y install php
[root@nmserver-7 ~]# rpm -ql php
/etc/httpd/conf.d/php.conf
/etc/httpd/conf.modules.d/10-php.conf
/usr/lib/httpd/modules/libphp5.so
/usr/share/httpd/icons/php.gif
/var/lib/php/session

 

　　3.2 将php与mysql关联起来

复制代码

[root@nmserver-7 ~]# yum install php-mysql
[root@nmserver-7 ~]# rpm -ql php-mysql
/etc/php.d/mysql.ini
/etc/php.d/mysqli.ini
/etc/php.d/pdo_mysql.ini
/usr/lib/php/modules/mysql.so
/usr/lib/php/modules/mysqli.so
/usr/lib/php/modules/pdo_mysql.so

复制代码

 

　　3.3 安装常用PHP模块

[root@nmserver-7 ~]# yum install -y php-gd php-ldap php-odbc php-pear php-xml php-xmlrpc php-mbstring php-snmp php-soap curl curl-devel php-bcmath

 

　　3.4 测试PHP

复制代码

[root@nmserver-7 ~]# cd  /var/www/html/
[root@nmserver-7 html]# ls
[root@nmserver-7 html]# pwd
/var/www/html
[root@nmserver-7 html]# vi info.php

<?php
        phpinfo();
?>
~                                                                                        
~                                                                                        
~                                                                                        
~                                                                                        
~                                                                                        
~                                                                                        
~                                                                                        
~                                                                            
:wq

复制代码

 

　　3.5重启apache服务器

[root@nmserver-7 html]# systemctl restart http

　　3.6测试PHP

　　在自己电脑浏览器输入 192.168.8.9/info.php，你可以看到已经安装的模块；

　　

至此，CentOS7下LAMP环境搭建好了！下一步可以安装zabbix了！

原文地址：https://www.cnblogs.com/duanlinxiao/p/10946462.html

版权声明：本文内容由互联网用户自发贡献，该文观点与技术仅代表作者本人。本站仅提供信息存储空间服务，不拥有所有权，不承担相关法律责任。如发现本站有涉嫌侵权/违法违规的内容， 请发送邮件至 dio@foxmail.com 举报，一经查实，本站将立刻删除。

相关推荐

2022年-5月22日centos7网络源安装mysql
安装开始...1.打开“https://dev.mysql.com/downloadsepo/yum/”下载Mysql源      将下载好的mysql源上传linux服务器 2.yumlocalinstallmysql80*#安装源 centos7中默认安装的是mariadb数据库，如果想要安装mysql，首先要移除mariadb；
K8S Helm安装部署 MariaDB 高可用、主从集群
安装Helm3#官网下载慢#wgethttps://get.helm.sh/helm-v3.5.4-linux-amd64.tar.gzwgethttp://qiniu.dev-share.top/helm-v3.5.4-linux-amd64.tar.gztar-zxvfhelm-v3.5.4-linux-amd64.tar.gzcplinux-amd64/helm/usr/local/bin#查看helmclient版本helmversion
安装MariaDB后无法启动怎么解决？
通过Linux命令行启动用的指令：systemctlstartmariadb.service反馈：Failedtostartmariadb.service:Unitmariadb.servicenotfound.MariaDB简介MariaDB是MySQL的一个分支，MariaDB打算保持与MySQL的高度兼容性，确保具有库二进制奇偶校验的直接替换功能，以及与MySQLAPI和命令
Centos7安装mariaDB
InstallingMariaDBServer10.4TodeployMariaDBCommunityServer10.4onRHEL7orCentOS7,firstdownloadandusethe mariadb_repo_setup scripttoconfiguretheMariaDBrepositoriesforYUM:$sudoyuminstallwget$wgethttps://downloads.mariadb.com/
MySQL存储引擎
阅读目录一什么是存储引擎二mysql支持的存储引擎三使用存储引擎一什么是存储引擎mysql中建立的库--> 文件夹库中建立的表--> 文件现实生活中我们用来存储数据的文件有不同的类型，每种文件类型对应各自不同的处理机制：比如处理文本用txt类型，处理表格用excel，处理图片
centos7 Mariadb 安装
1、安装MariaDB安装命令yum-yinstallmariadbmariadb-server安装完成MariaDB，首先启动MariaDBsystemctlstartmariadb设置开机启动systemctlenablemariadb[root@node1~]#systemctlenablemariadbCreatedsymlinkfrom/etc/systemd/system/multi-user.target.wants/m
ERROR 1045 (28000): Access denied for user &#039;root&#039;@&#039;localhost&#039; (using password: N
Centos7.5 刚安装的mariadb数据库报错报错:ERROR1045(28000):Accessdeniedforuser'root'@'localhost'(usingpassword:NO)原因一:没有启动数据库解决方法:systemctlstartmariadbsystemctlenablemariadb原因二:未知解决方法:[root@db01~]#
mariadb多实例安装
基于YUM安装的mariadb多实例.=================================================================1.yum安装mariadb-server包#yuminstallmariadb-server2.创建多实例对应的目录结构#mkdir/mysql/{3306,3307,3308}/{data,etc,socket,log,bin,pid}-pv#tree/mysql//mysql/
centos7 mysql数据库安装和配置
一、系统环境[root@localhost~]#cat/etcedhat-releaseCentOSLinuxrelease7.6.1810(Core)二、mysql安装#yuminstallmysqlmysql-servermysql-devel安装mysql-server失败，如下图：[root@localhost~]#yuminstallmysql-serverLoadedplugins:fastestmirrorLoadingm
MariaDB
数据库的选择两大点是：开源和跨平台，满足这三点MySQL、MongoDB和MariaDB。其中MariaDB是MySQL的分支，也是它的进阶产品，未来很有可能替代MySQL。与MySQL相比较，MariaDB更强的地方在于：Maria 存储引擎PBXT存储引擎XtraDB 存储引擎FederatedX 存储引擎更快的复制查询处理线
Host is not allowed to connect to this MariaDB server
使用Navicat连接数据库时出现了 HostxxxisnotallowedtoconnecttothisMariaDbserver的情况。发现了是因为授权的问题，使得连接权限受阻。所以，只需要进入数据库中，给予其权限即可。具体解决代码如下：[root@localhost~]#mysql-uroot-pEnterpassword:#首先进入mys
mysql 基本操作 四
1.临时表当绘画结束时，临时表会自动销毁，无法用showtables查看临时表。MariaDB[jason]>createtemporarytabletmp(prochar(30),citychar(30));QueryOK,0rowsaffected(0.01sec)MariaDB[jason]>insertintotmpvalues('shanghai','shanghai');QueryOK,1
数据库基础[1]安装与操作mariadb
为了看阳光我来到世上数据库介绍数据库是一个存放数据的仓库，目前市面上最流行的数据库大致氛围的两种，一种叫做关系型数据库，一种叫做非关系型数据库，而关系型数据库近期流行的即为mysql,mysql原本是一个开源的数据库后被oracle公司收购，开始进行服务收费，因此，市面上大多数免费
Linux中的mysql.redis
1,Linux上的mysql MariaDB数据库管理系统是MySQL的一个分支，主要由开源社区在维护，采用GPL授权许可。开发这个分支的原因之一是：甲骨文公司收购了MySQL后，有将MySQL闭源的潜在风险，因此社区采用分支的方式来避开这个风险。MariaDB的目的是完全兼容MySQL，包括API和命令行，使之能轻松
CentOS MariaDB配置
启动Mariadb前提需安装mariadb-server-安装mariadb-serveryuminstall-ymariadb-server-启动服务systemctlstartmariadb.service-添加到开机启动systemctlenablemariadb.service-安全设置，以及修改数据库管理员密码mysql_secure_installation-启
Centos安装Maria
1、查看是否安装及可用安装：yumlist|grepmaria2、安装maria(依赖其他几个安装包）：yuminstallmariadb-server.x86_64输入'y'继续安装直到安装结束3、检查是否安装：4、安装完后登录提示错误:mysql-uroot-p是由于安装完但是并未启动maria服务5、启动maria有以下几种方法：system
MySQL主从自动配置脚本
通过yum安装mariadb，并配置MySQL主从服务器主服务器：192.168.10.11从服务器：192.168.10.12#!/bin/bash#====================================================#Author:Mr.Song#CreateDate:2019-02-21#Description:autoconfigMySQLmaster&slave#=====================
20190225 实验：实现基于SSL加密的主从复制
实验：实现基于SSL加密的主从复制实验步骤：环境：三台主机，一台CA：200，一台master：150，一台slave：100平时都是在CA上帮用户生成私钥，在服务器上做的1CA,master,slave的证书相关文件mkdir/etc/my.cnf.d/sslcd/etc/my.cnf.d/sslopensslgenrsa2048>cakey.pemopensslreq-new-x509-k
DML、DQL与单表多表的增删改查20190215下午
MariaDB[db1]>select*fromstudent;+----+------+-----+--------+-------+|id|name|age|gender|phone|+----+------+-----+--------+-------+|1|a|20|m|119||2|b|20|m|120||3|c|20|m|110
windows安装mariaDB失败，服务不能启动
过年了，在老家闲余时间想敲敲代码，发现在安装mariaDb的时候一直报错错误信息：Service‘MySQL’(MySQL)Faildtostart,Verifythatyouhavesuffcientprivilegestostartsystemservices.服务的MySQL(MySQL)启动错误,确认你有权限启动系统服务。记得多年前在使用sqlserver数
pythonJavaScriptjavaHTMLPHPreactjsC#AndroidCSSNode.jssqlrpython-3.xMysqLjQueryc++pandasFlutterangularIOSdjangolinuxswifttypescript路由器JSON路由器设置无线路由器h3c华三华三路由器设置华三路由器电脑软件教程arraysdocker软件图文教程Cvue.jslaravelspring-boot