如何解决从终端中的命令行执行程序,并将路径写入两个文件
我编写了程序的三个不同部分(这些部分分别命名为tokenize,countWords和printTopMost,并将它们放置在名为wordfreq的文件模块中),这些部分将组成一个完整的工作程序(我称之为最顶层)。
我希望从程序中执行该程序,如下所示:
$ python3 topmost.py eng_stopwords.txt examples/article1.txt 20
word 30
words 21
count 11
text 9
000 9
counting 7
fiction 6
novel 6
rules 5
length 5
used 4
usually 4
details 4
software 4
sources 4
processing 4
segmentation 4
rule 4
novels 4
number 3
在程序名称(最上面)之后,有两个文件的路径和一个参数。我想通过导入模块sys从程序访问那些参数(或命令行参数),例如:
import sys
,然后指定参数,例如:
sys.argv[1]
这是我一直在写的代码:
import wordfreq
import sys
import urllib.request
def main():
words = wordfreq.tokenize(open(sys.argv[1]))
words.close()
frequencies = wordfreq.countWords(words,str(open(sys.argv[2])).strip('\n'))
frequencies.close()
wordfreq.printTopMost(frequencies,sys.argv[3])
# Close the file with the stop words.
main()
当我运行程序时,它会给出结果:
Erics-MBP:Laboration_1 ericjohannesson$ topmost.py eng_stopwords.txt examples/article.txt 20
bash: topmost.py: command not found
我做错了什么?问题的代码在哪里?
我需要有关我要编写的程序或任何其他内容的更多信息,请随时询问。
解决方法
您没有正确调用python。
您需要在命令行调用中插入min
一词,以便您的终端知道您正在使用python来调用python
文件。
请注意,我将topmost.py
放在python
之后,但之前 $
topmost.py
版权声明:本文内容由互联网用户自发贡献,该文观点与技术仅代表作者本人。本站仅提供信息存储空间服务,不拥有所有权,不承担相关法律责任。如发现本站有涉嫌侵权/违法违规的内容, 请发送邮件至 dio@foxmail.com 举报,一经查实,本站将立刻删除。