结构的配置

分类：编程问答

如何解决结构的配置

组织：

# SampleOrg defines an MSP using the sampleconfig.  It should never be used
# in production but may be used as a template for other definitions
- &OrdererOrg
    # DefaultOrg defines the organization which is used in the sampleconfig
    # of the fabric.git development environment
    Name: OrdererOrg

    # ID to load the MSP definition as
    ID: OrdererMSP

    # MSPDir is the filesystem path which contains the MSP configuration
    MSPDir: crypto-config/ordererOrganizations/example.com/msp

    # Policies defines the set of policies at this level of the config tree
    # For organization policies,their canonical path is usually
    #   /Channel/<Application|Orderer>/<OrgName>/<PolicyName>
    Policies:
        Readers:
            Type: Signature
            Rule: "OR('OrdererMSP.member')"
        Writers:
            Type: Signature
            Rule: "OR('OrdererMSP.member')"
        Admins:
            Type: Signature
            Rule: "OR('OrdererMSP.admin')"

- &Org1
    # DefaultOrg defines the organization which is used in the sampleconfig
    # of the fabric.git development environment
    Name: Org1MSP

    # ID to load the MSP definition as
    ID: Org1MSP

    MSPDir: crypto-config/peerOrganizations/org1.example.com/msp

    # Policies defines the set of policies at this level of the config tree
    # For organization policies,their canonical path is usually
    #   /Channel/<Application|Orderer>/<OrgName>/<PolicyName>
    Policies:
        Readers:
            Type: Signature
            Rule: "OR('Org1MSP.admin','Org1MSP.peer','Org1MSP.client')"
        Writers:
            Type: Signature
            Rule: "OR('Org1MSP.admin','Org1MSP.client')"
        Admins:
            Type: Signature
            Rule: "OR('Org1MSP.admin')"
        Endorsement:
            Type: Signature
            Rule: "OR('Org1MSP.peer')"

    # leave this flag set to true.
    AnchorPeers:
        # AnchorPeers defines the location of peers which can be used
        # for cross org gossip communication.  Note,this value is only
        # encoded in the genesis block in the Application section context
        - Host: peer0.org1.example.com
          Port: 7051

- &Org2
    # DefaultOrg defines the organization which is used in the sampleconfig
    # of the fabric.git development environment
    Name: Org2MSP

    # ID to load the MSP definition as
    ID: Org2MSP

    MSPDir: crypto-config/peerOrganizations/org2.example.com/msp

    # Policies defines the set of policies at this level of the config tree
    # For organization policies,their canonical path is usually
    #   /Channel/<Application|Orderer>/<OrgName>/<PolicyName>
    Policies:
        Readers:
            Type: Signature
            Rule: "OR('Org2MSP.admin','Org2MSP.peer','Org2MSP.client')"
        Writers:
            Type: Signature
            Rule: "OR('Org2MSP.admin','Org2MSP.client')"
        Admins:
            Type: Signature
            Rule: "OR('Org2MSP.admin')"
        Endorsement:
            Type: Signature
            Rule: "OR('Org2MSP.peer')"

    AnchorPeers:
        # AnchorPeers defines the location of peers which can be used
        # for cross org gossip communication.  Note,this value is only
        # encoded in the genesis block in the Application section context
        - Host: peer0.org2.example.com
          Port: 7051

功能： ＃渠道功能同时适用于订购者和对等方，并且必须 两者都支持。 ＃将功能的值设置为true以要求它。 频道：＆ChannelCapabilities ＃V2_0功能可确保订购者和对等对象的行为符合 ＃到v2.0频道功能。订购者和同行来自 ＃先前版本的行为不兼容，因此 ＃无法加入v2.0功能的频道。 ＃在启用V2.0通道功能之前，请确保所有 频道上的＃个订购者和同级设备的版本为v2.0.0或更高版本。 V2_0：是

# Orderer capabilities apply only to the orderers,and may be safely
# used with prior release peers.
# Set the value of the capability to true to require it.
Orderer: &OrdererCapabilities
    # V2_0 orderer capability ensures that orderers behave according
    # to v2.0 orderer capabilities. Orderers from
    # prior releases would behave in an incompatible way,and are therefore
    # not able to participate in channels at v2.0 orderer capability.
    # Prior to enabling V2.0 orderer capabilities,ensure that all
    # orderers on channel are at v2.0.0 or later.
    V2_0: true

# Application capabilities apply only to the peer network,and may be safely
# used with prior release orderers.
# Set the value of the capability to true to require it.
Application: &ApplicationCapabilities
    # V2_0 application capability ensures that peers behave according
    # to v2.0 application capabilities. Peers from
    # prior releases would behave in an incompatible way,and are therefore
    # not able to participate in channels at v2.0 application capability.
    # Prior to enabling V2.0 application capabilities,ensure that all
    # peers on channel are at v2.0.0 or later.
    V2_0: true

应用程序：＆ApplicationDefaults 

# Organizations is the list of orgs which are defined as participants on
# the application side of the network
Organizations:

# Policies defines the set of policies at this level of the config tree
# For Application policies,their canonical path is
#   /Channel/Application/<PolicyName>
Policies:
    Readers:
        Type: ImplicitMeta
        Rule: "ANY Readers"
    Writers:
        Type: ImplicitMeta
        Rule: "ANY Writers"
    Admins:
        Type: ImplicitMeta
        Rule: "MAJORITY Admins"
    LifecycleEndorsement:
        Type: ImplicitMeta
        Rule: "MAJORITY Endorsement"
    Endorsement:
        Type: ImplicitMeta
        Rule: "MAJORITY Endorsement"

Capabilities:
    <<: *ApplicationCapabilities

订购者：＆OrdererDefaults 

# Orderer Type: The orderer implementation to start
OrdererType: etcdraft

# Addresses used to be the list of orderer addresses that clients and peers
# could connect to.  However,this does not allow clients to associate orderer
# addresses and orderer organizations which can be useful for things such
# as TLS validation.  The preferred way to specify orderer addresses is now
# to include the OrdererEndpoints item in your org definition
Addresses:
    - orderer0.example.com:7050
    - orderer1.example.com:7050
    - orderer2.example.com:7050

EtcdRaft:
    Consenters:
        - Host: orderer0.example.com
          Port: 7050
          ClientTLSCert: crypto-config/ordererOrganizations/example.com/orderers/orderer0.example.com/tls/server.crt
          ServerTLSCert: crypto-config/ordererOrganizations/example.com/orderers/orderer0.example.com/tls/server.crt
        - Host: orderer1.example.com
          Port: 7050
          ClientTLSCert: crypto-config/ordererOrganizations/example.com/orderers/orderer1.example.com/tls/server.crt
          ServerTLSCert: crypto-config/ordererOrganizations/example.com/orderers/orderer1.example.com/tls/server.crt
         - Host: orderer2.example.com
          Port: 7050
          ClientTLSCert: crypto-config/ordererOrganizations/example.com/orderers/orderer2.example.com/tls/server.crt
          ServerTLSCert: crypto-config/ordererOrganizations/example.com/orderers/orderer2.example.com/tls/server.crt

# Batch Timeout: The amount of time to wait before creating a batch
BatchTimeout: 2s

# Batch Size: Controls the number of messages batched into a block
BatchSize:

    # Max Message Count: The maximum number of messages to permit in a batch
    MaxMessageCount: 10

    # Absolute Max Bytes: The absolute maximum number of bytes allowed for
    # the serialized messages in a batch.
    AbsoluteMaxBytes: 99 MB

    # Preferred Max Bytes: The preferred maximum number of bytes allowed for
    # the serialized messages in a batch. A message larger than the preferred
    # max bytes will result in a batch larger than preferred max bytes.
    PreferredMaxBytes: 512 KB

# Organizations is the list of orgs which are defined as participants on
# the orderer side of the network
Organizations:

# Policies defines the set of policies at this level of the config tree
# For Orderer policies,their canonical path is
#   /Channel/Orderer/<PolicyName>
Policies:
    Readers:
        Type: ImplicitMeta
        Rule: "ANY Readers"
    Writers:
        Type: ImplicitMeta
        Rule: "ANY Writers"
    Admins:
        Type: ImplicitMeta
        Rule: "MAJORITY Admins"
    # BlockValidation specifies what signatures must be included in the block
    # from the orderer for the peer to validate it.
    BlockValidation:
        Type: ImplicitMeta
        Rule: "ANY Writers"

频道：＆ChannelDefaults ＃策略在配置树的此级别定义策略集 ＃对于渠道政策，其规范路径为 ＃/频道/ 政策： ＃谁可以调用“传递” API 读者： 类型：隐式元 规则：“任何读者” ＃谁可以调用“广播” API 作家： 类型：隐式元 规则：“任何作家” ＃默认情况下，谁可以在此配置级别修改元素 管理员： 类型：隐式元 规则：“ MAJORITY Admins” 

# Capabilities describes the channel level capabilities,see the
# dedicated Capabilities section elsewhere in this file for a full
# description
Capabilities:
    <<: *ChannelCapabilities

个人资料：

TwoOrgsOrdererGenesis:
    <<: *ChannelDefaults
    Orderer:
        <<: *OrdererDefaults
        Organizations:
            - *OrdererOrg
        Capabilities:
            <<: *OrdererCapabilities
    Consortiums:
        SampleConsortium:
            Organizations:
                - *Org1
                - *Org2
TwoOrgsChannel:
    Consortium: SampleConsortium
    <<: *ChannelDefaults
    Application:
        <<: *ApplicationDefaults
        Organizations:
            - *Org1
            - *Org2
        Capabilities:
            <<: *ApplicationCapabilities

版权声明：本文内容由互联网用户自发贡献，该文观点与技术仅代表作者本人。本站仅提供信息存储空间服务，不拥有所有权，不承担相关法律责任。如发现本站有涉嫌侵权/违法违规的内容， 请发送邮件至 dio@foxmail.com 举报，一经查实，本站将立刻删除。

相关推荐

导入项目后报错问题
依赖报错 idea导入项目后依赖报错，解决方案：https://blog.csdn.net/weixin_42420249/article/details/81191861 依赖版本报错：更换其他版本 无法下载依赖可参考：https://blog.csdn.net/weixin_42628809/a
idea不能识别yaml文件
使用mybatis plus常见错误
错误1：代码生成器依赖和mybatis依赖冲突 启动项目时报错如下 2021-12-03 13:33:33.927 ERROR 7228 [ main] o.s.b.d.LoggingFailureAnalysisReporter : *************************** APPL
gradle常见问题与错误
错误1：gradle项目控制台输出为乱码 # 解决方案：https://blog.csdn.net/weixin_43501566/article/details/112482302 # 在gradle-wrapper.properties 添加以下内容 org.gradle.jvmargs=-Df
Mybatis Plus传入参数0不起作用
错误还原：在查询的过程中，传入的workType为0时，该条件不起作用 &lt;select id=&quot;xxx&quot;&gt; SELECT di.id, di.name, di.work_type, di.updated... &lt;where&gt; &lt;if test=&qu
linux中make编译源码包失败
报错如下，gcc版本太低 ^ server.c:5346:31: 错误：‘struct redisServer’没有名为‘server_cpulist’的成员 redisSetCpuAffinity(server.server_cpulist); ^ server.c: 在函数‘hasActiveC
微服务启动错误：Command line is too long. Shorten command line for
解决方案1 1、改项目中.idea/workspace.xml配置文件，增加dynamic.classpath参数 2、搜索PropertiesComponent，添加如下 &lt;property name=&quot;dynamic.classpath&quot; value=&quot;tru
vue常见错误
删除根组件app.vue中的默认代码后报错：Module Error (from ./node_modules/eslint-loader/index.js): 解决方案：关闭ESlint代码检测，在项目根目录创建vue.config.js，在文件中添加 module.exports = { lin
spark常见错误
查看spark默认的python版本 [root@master day27]# pyspark /home/software/spark-2.3.4-bin-hadoop2.7/conf/spark-env.sh: line 2: /usr/local/hadoop/bin/hadoop: No s
matplotlib报错：AttributeError: module 'backend_interagg' has no attribute 'FigureCanvas'. Did you mean: 'FigureCanvasAgg'?
使用本地python环境可以成功执行 import pandas as pd import matplotlib.pyplot as plt # 设置字体 plt.rcParams[&#39;font.sans-serif&#39;] = [&#39;SimHei&#39;] # 能正确显示负号 p
gitlab登录失败，报错：This challenge page was accidentally cached by an intermediary and is no longer available.
设置时间 控制面板
后端开发常见错误
错误1：Request method ‘DELETE‘ not supported 错误还原：controller层有一个接口，访问该接口时报错：Request method ‘DELETE‘ not supported 错误原因：没有接收到前端传入的参数，修改为如下 参考 错误2：cannot r
docker常见错误
错误1：启动docker镜像时报错：Error response from daemon: driver failed programming external connectivity on endpoint quirky_allen 解决方法：重启docker -&gt; systemctl r
idea常见错误
错误1：private field ‘xxx‘ is never assigned 按Altʾnter快捷键，选择第2项 参考：https://blog.csdn.net/shi_hong_fei_hei/article/details/88814070 错误2：启动时报错，不能找到主启动类 #
pip安装依赖失败
报错如下，通过源不能下载，最后警告pip需升级版本 Requirement already satisfied: pip in c:\users\ychen\appdata\local\programs\python\python310\lib\site-packages (22.0.4) Coll
maven常见错误
错误1：maven打包报错 错误还原：使用maven打包项目时报错如下 [ERROR] Failed to execute goal org.apache.maven.plugins:maven-resources-plugin:3.2.0:resources (default-resources)
cloud项目中常见错误
错误1：服务调用时报错 服务消费者模块assess通过openFeign调用服务提供者模块hires 如下为服务提供者模块hires的控制层接口 @RestController @RequestMapping(&quot;/hires&quot;) public class FeignControl
springboot常见错误
错误1：运行项目后报如下错误 解决方案 报错2：Failed to execute goal org.apache.maven.plugins:maven-compiler-plugin:3.8.1:compile (default-compile) on project sb 解决方案：在pom.
springmvc拦截器中使用redisTemplate报空指针异常
参考 错误原因 过滤器或拦截器在生效时，redisTemplate还没有注入 解决方案：在注入容器时就生效 @Component //项目运行时就注入Spring容器 public class RedisBean { @Resource private RedisTemplate&lt;String
vite报错：npm ERR! command C:WINDOWSsystem32cmd.exe /d /s /c C:UsersychenAppDataLocalTempnpx-dde1c848.cmd
使用vite构建项目报错 C:\Users\ychen\work&gt;npm init @vitejs/app @vitejs/create-app is deprecated, use npm init vite instead C:\Users\ychen\AppData\Local\npm-
pythonJavaScriptjavaHTMLPHPreactjsC#AndroidCSSNode.jssqlrpython-3.xMysqLjQueryc++pandasFlutterangularIOSdjangolinuxswifttypescript路由器JSON路由器设置无线路由器h3c华三华三路由器设置华三路由器电脑软件教程arraysdocker软件图文教程Cvue.jslaravelspring-boot