替换 C 中的中断

如何解决替换 C 中的中断

我正在编写一个程序,用于主脑电脑游戏。当我第一次写它时,老师没有告诉我们我们不能使用break,所以我做了。但不允许使用break。我试图找到一种方法来替换中断,但更改逻辑对我来说很难理解。这是我的工作原始代码:

    //If number of matches is not equal to length,print the hints and check for pica's
    if(matches != LENGTH) {
        //First,print as many fermi hints as matches
        for(int i = 0; i < matches; i++) {
            printf("fermi ");
        }
        //Then,second loop to check for pica hints
        for(int i = 0; i < LENGTH; i++) {
            //We use the i index if not used before
            if(!usedNum[i]) {
                for(int j = 0; j < LENGTH; j++) {
                    //Check if the digit is the same for given indices if not used already on guess
                    if(!usedGuess[j] && num[i] == guess[j]) {
                        //If so,we have a match but on incorrect position
                        usedNum[i] = true;
                        usedGuess[j] = true;
                        used++;
                        printf("pica ");
                        break;
                    }
                }
            }
        }
        //If no used numbers,we print "bagels"
        if(used == 0) {
            printf("bagels");
        }
        printf("\n"); //line break after hints
    }
    //Finally,we return the num of matches
    return matches;
}

我尝试将其更改为 do while 循环。

 if(matches != LENGTH) {
        //First,second loop to check for pica hints
        for(int i = 0; i < LENGTH; i++) {
            //We use the i index if not used before
            if(!usedNum[i]) {
                do {
                    //Check if the digit is the same for given indices if not used already on guess
                        int j = 0;
                        //If so,we have a match but on incorrect position
                        usedNum[i] = true;
                        usedGuess[j] = true;
                        used++;
                        printf("pica ");                        
                    } while (usedGuess[j] || num[i] == guess[j]);
            } 
            }
        }
        //If no used numbers,we return the num of matches
    return matches;
}

阅读有关植入的信息。我的原始代码可以声明为这样做直到。然而,使用 while 循环的新代码是在此语句为真时执行此操作。所以对于原始代码,我的新代码有停止条件,我必须提出继续条件,对吗?有没有更好的逻辑循环可以使用?

我看到另一篇文章提到了子函数,但我们从未在课堂上介绍过它们,所以我认为我们不允许使用它们,尽管我仍然不确定如何实现。

解决方法

您可以使用多种方法来代替 break;。由于限制 break; 的使用似乎不合理,而且可能还有其他一些限制,我无法确定每种方式是否都会被接受。

更改 j 的值以退出循环:

for(int j = 0; j < LENGTH; j++) {
    if(!usedGuess[j] && num[i] == guess[j]) {
        /* snipped */
        j  = LENGTH;
    }
}

使用另一个标志退出循环:

bool found = false;
for(int j = 0; !found && j < LENGTH; j++) {
    if(!usedGuess[j] && num[i] == guess[j]) {
        /* snipped */
        found = true;
    }
}

使用 goto(可能有些人不鼓励,但这是一种有效的语法):

for(int j = 0; j < LENGTH; j++) {
    if(!usedGuess[j] && num[i] == guess[j]) {
        /* snipped */
        goto after_the_loop;
    }
}
after_the_loop:;
,

您的 while 循环出了点问题,您在循环内将 j 初始化为 0。

for(int i = 0; i < LENGTH; i++) {
    if (!usedNum[i]) {
        int j=0,k=0;
        while (j < LENGTH && !k) {
           if(!usedGuess[j] && num[i] == guess[j]) {
                usedNum[i] = true;
                usedGuess[j] = true;
                used++;
                k++;
                printf("pica ");
            }
            j++;
        }
    }
}

我认为应该这样做。

,

对于像您这样的情况,我会强烈考虑将内部条件合并到循环条件中:

                int j;
                for (j = 0; j < LENGTH && (usedGuess[j] || num[i] != guess[j]); j++) /* empty */ ;
                if (j < LENGTH) {
                    // we have a match,but on an incorrect position
                    usedNum[i] = true;
                    usedGuess[j] = true;
                    used++;
                    printf("pica ");
                }

该循环仅搜索满足所有所需条件的索引 j。如果它在终止时使 j 小于 LENGTH,那么您知道 j 的最终值也满足所有其他条件。

版权声明:本文内容由互联网用户自发贡献,该文观点与技术仅代表作者本人。本站仅提供信息存储空间服务,不拥有所有权,不承担相关法律责任。如发现本站有涉嫌侵权/违法违规的内容, 请发送邮件至 dio@foxmail.com 举报,一经查实,本站将立刻删除。

相关推荐


依赖报错 idea导入项目后依赖报错,解决方案:https://blog.csdn.net/weixin_42420249/article/details/81191861 依赖版本报错:更换其他版本 无法下载依赖可参考:https://blog.csdn.net/weixin_42628809/a
错误1:代码生成器依赖和mybatis依赖冲突 启动项目时报错如下 2021-12-03 13:33:33.927 ERROR 7228 [ main] o.s.b.d.LoggingFailureAnalysisReporter : *************************** APPL
错误1:gradle项目控制台输出为乱码 # 解决方案:https://blog.csdn.net/weixin_43501566/article/details/112482302 # 在gradle-wrapper.properties 添加以下内容 org.gradle.jvmargs=-Df
错误还原:在查询的过程中,传入的workType为0时,该条件不起作用 &lt;select id=&quot;xxx&quot;&gt; SELECT di.id, di.name, di.work_type, di.updated... &lt;where&gt; &lt;if test=&qu
报错如下,gcc版本太低 ^ server.c:5346:31: 错误:‘struct redisServer’没有名为‘server_cpulist’的成员 redisSetCpuAffinity(server.server_cpulist); ^ server.c: 在函数‘hasActiveC
解决方案1 1、改项目中.idea/workspace.xml配置文件,增加dynamic.classpath参数 2、搜索PropertiesComponent,添加如下 &lt;property name=&quot;dynamic.classpath&quot; value=&quot;tru
删除根组件app.vue中的默认代码后报错:Module Error (from ./node_modules/eslint-loader/index.js): 解决方案:关闭ESlint代码检测,在项目根目录创建vue.config.js,在文件中添加 module.exports = { lin
查看spark默认的python版本 [root@master day27]# pyspark /home/software/spark-2.3.4-bin-hadoop2.7/conf/spark-env.sh: line 2: /usr/local/hadoop/bin/hadoop: No s
使用本地python环境可以成功执行 import pandas as pd import matplotlib.pyplot as plt # 设置字体 plt.rcParams[&#39;font.sans-serif&#39;] = [&#39;SimHei&#39;] # 能正确显示负号 p
错误1:Request method ‘DELETE‘ not supported 错误还原:controller层有一个接口,访问该接口时报错:Request method ‘DELETE‘ not supported 错误原因:没有接收到前端传入的参数,修改为如下 参考 错误2:cannot r
错误1:启动docker镜像时报错:Error response from daemon: driver failed programming external connectivity on endpoint quirky_allen 解决方法:重启docker -&gt; systemctl r
错误1:private field ‘xxx‘ is never assigned 按Altʾnter快捷键,选择第2项 参考:https://blog.csdn.net/shi_hong_fei_hei/article/details/88814070 错误2:启动时报错,不能找到主启动类 #
报错如下,通过源不能下载,最后警告pip需升级版本 Requirement already satisfied: pip in c:\users\ychen\appdata\local\programs\python\python310\lib\site-packages (22.0.4) Coll
错误1:maven打包报错 错误还原:使用maven打包项目时报错如下 [ERROR] Failed to execute goal org.apache.maven.plugins:maven-resources-plugin:3.2.0:resources (default-resources)
错误1:服务调用时报错 服务消费者模块assess通过openFeign调用服务提供者模块hires 如下为服务提供者模块hires的控制层接口 @RestController @RequestMapping(&quot;/hires&quot;) public class FeignControl
错误1:运行项目后报如下错误 解决方案 报错2:Failed to execute goal org.apache.maven.plugins:maven-compiler-plugin:3.8.1:compile (default-compile) on project sb 解决方案:在pom.
参考 错误原因 过滤器或拦截器在生效时,redisTemplate还没有注入 解决方案:在注入容器时就生效 @Component //项目运行时就注入Spring容器 public class RedisBean { @Resource private RedisTemplate&lt;String
使用vite构建项目报错 C:\Users\ychen\work&gt;npm init @vitejs/app @vitejs/create-app is deprecated, use npm init vite instead C:\Users\ychen\AppData\Local\npm-