Ansible cli_command 提示未按预期工作

如何解决Ansible cli_command 提示未按预期工作

我正在尝试从 Cisco 设备执行 ping 命令。我必须使用扩展的 ping 命令，我不能只在一行中指定参数。

这是路由器所期望的：

ping
Protocol [ip]: 
Target IP address: <IP HERE>
Repeat count [5]:
Datagram size [100]:
Timeout in seconds [2]:
Extended commands [n]: y
Ingress ping [n]:
Source address or interface: <INT HERE>
DSCP Value [0]:
Type of service [0]:
Set DF bit in IP header? [no]:
Validate reply data? [no]:
Data pattern [0x0000ABCD]:
Loose,Strict,Record,Timestamp,Verbose[none]:
Sweep range of sizes [n]:

如您所见，我只定义了目标 IP、扩展命令标志和源接口。

这就是我的任务现在的样子：

- name: Run Cisco command (ping)
  cli_command:
    command: ping
    prompt:
      - "Protocol [ip]:"
      - "Target IP address:"
      - "Repeat count [5]:"
      - "Datagram size [100]:"
      - "Timeout in seconds [2]:"
      - "Extended commands [n]:"
      - "Ingress ping [n]:"
      - "Source address or interface:"
      - "DSCP Value [0]:"
      - "Type of service [0]:"
      - "Set DF bit in IP header? [no]:"
      - "Validate reply data? [no]:"
      - "Data pattern [0x0000ABCD]:"
      - "Loose,Verbose[none]:"
      - "Sweep range of sizes [n]:"
    answer:
      - ''
      - "{{ item }}"
      - "{{ count }}" (I'm specifying the number of packets here but its optional,same for the size)
      - "{{ size }}"
      - ''
      - y
      - ''
      - loopback1
      - ''
      - ''
      - ''
      - ''
      - ''
      - ''
      - ''
  with_lines: cat "{{ dest_file }}"
  ignore_errors: yes
  when: ansible_network_os == 'ios'

这就是 ansible 的回报：

"results":[
      {
         "ansible_loop_var":"item","item": first target here,"changed":false,"failed":true,"invocation":{
            "module_args":{
               "sendonly":false,"prompt":[
                  "Protocol [ip]","Target IP address","Repeat count [5]","Datagram size [100]:","Timeout in seconds [2]:","Extended commands [n]","Ingress ping [n]","Source address or interface","DSCP Value [0]","Type of service [0]","Set DF bit in IP header? [no]","Validate reply data? [no]","Data pattern [0x0000ABCD]","Loose,Verbose[none]","Sweep range of sizes [n]"
               ],"check_all":true,"newline":true,"command":"ping","answer":[
                  "","192.168.1.1",(first target here)
                  "5","72","","y","loopback 1",""
               ]
            }
         },"ansible_facts":{
            "discovered_interpreter_python":"/usr/bin/python"
         },**"msg":"timeout value 30 seconds reached while trying to send command: ping"**
      },{
         "ansible_loop_var":"item",**"stdout":"% Unknown protocol - \"ping\",type \"ping ?\" for help",**
         "failed":false,"item":"second target here","192.168.1.2",(second target here)
                  "5","stdout_lines":[
            **"% Unknown protocol - \"ping\",type \"ping ?\" for help"**
         ]
      }

首先，每对 IP 中的第一个总是超时，即使它可以访问。无论是 30 秒还是 120 秒超时都没有关系。

第二，为什么第一个提示（协议）取值“ping”而不是值“”？ "% 未知协议 - "ping"，键入 "ping ?" 寻求帮助"

我将空答案更改为："",'',\n,"ip" 但没有任何效果，结果始终相同。

我也将提示更改为：“Protocol [ip]:”、“Protocol [ip]”、“Protocol [ip]:”、Protocol [ip]、Protocol [ip] 但都没有工作。

这个想法是 15 个答案按顺序回答 15 个提示。

知道我做错了什么吗？