一、centos6.6安装Docker 1.7.1

分类：CentOS作者：编程之家用户

Docker官网上针对Centos的的安装需求如下:

Docker requires a 64-bit installation regardless of your CentOS version. Also,your kernel must be 3.10 at minimum,which CentOS 7 runs.

看来如果我们想在低于3.x内核的操作系统（比如Centos6.6）上装Docker最新版，势必要升级内核了。且不说升级内核步骤繁琐、容易出错，单就这种比较怪异的搭配：Centos6.x + Kerneol3.X + Docker1.11，就没有人能够保证其稳定性。故我的建议是设法在Centos6.6上安装较低版本的Docker。事实上，对于内核版本要大于3.10这个要求，是从Docker1.8.2版本开始的，Docker之前的版本是可以运行在较低内核版本之上的，比如1.7.1。

　　

首先，看下我的操作环境以及直接安装Docker的现象：

[root@bogon docker]# uname -a

Linux bogon 2.6.32-504.el6.x86_64 #1 SMP Wed Oct 15 04:27:16 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux

[root@bogon docker]# cat /etc/redhat-release

CentOS release 6.6 (Final)

[root@bogon docker]# docker

bash: docker: command not found

[root@bogon docker]# yum install docker

Loaded plugins: fastestmirror,refresh-packagekit,security
Setting up Install Process
Loading mirror speeds from cached hostfile
* base: mirrors.tuna.tsinghua.edu.cn
* epel: dl.fedoraproject.org
* extras: mirrors.tuna.tsinghua.edu.cn
* updates: mirrors.tuna.tsinghua.edu.cn
http://repos.fedorapeople.org/repos/peter/erlang/epel-6/x86_64/repodata/repomd.xml: [Errno 14] PYCURL ERROR 22 - "The requested URL returned error: 404 Not Found"
Trying other mirror.
To address this issue please refer to the below knowledge base article

https://access.redhat.com/articles/1320623

If above article doesn't help to resolve this issue please open a ticket with Red Hat Support.

No package docker available.
Error: Nothing to do

[root@bogon docker]# yum install docker-io

Loaded plugins: fastestmirror,security
Setting up Install Process
Loading mirror speeds from cached hostfile
* base: mirrors.tuna.tsinghua.edu.cn
* epel: pubmirror1.math.uh.edu
* extras: mirrors.tuna.tsinghua.edu.cn
* updates: mirrors.tuna.tsinghua.edu.cn
http://repos.fedorapeople.org/repos/peter/erlang/epel-6/x86_64/repodata/repomd.xml: [Errno 14] PYCURL ERROR 22 - "The requested URL returned error: 404 Not Found"
Trying other mirror.
To address this issue please refer to the below knowledge base article

https://access.redhat.com/articles/1320623

If above article doesn't help to resolve this issue please open a ticket with Red Hat Support.

No package docker-io available.
Error: Nothing to do


可以看到，在Centos6.7的标准yum源中已经没有Docker的安装包了，这时，我们需要安装EPEL。

EPEL（Extra Packages for Enterprise Linux），企业版Linux额外包，RHEL分布非标准包的社区类库。安装如下：


[root@bogon docker]# rpm -iUvh http://dl.fedoraproject.org/pub/epel/6/x86_64/epel-release-6-8.noarch.rpm

Retrieving http://dl.fedoraproject.org/pub/epel/6/x86_64/epel-release-6-8.noarch.rpm
warning: /var/tmp/rpm-tmp.em6i9i: Header V3 RSA/SHA256 Signature,key ID 0608b895: NOKEY
Preparing... ########################################### [100%]
1:epel-release ########################################### [100%]


接下来安装Docker1.7.1，在1.7.1中，安装包名称为docker-io，故我们的安装命令如下：

[root@bogon docker]# yum install docker-io

Loaded plugins: fastestmirror,security
Setting up Install Process
Loading mirror speeds from cached hostfile
epel/metalink | 7.1 kB 00:00
* base: mirrors.tuna.tsinghua.edu.cn
* epel: mirrors.tuna.tsinghua.edu.cn
* extras: mirrors.tuna.tsinghua.edu.cn
* updates: mirrors.tuna.tsinghua.edu.cn
epel | 4.3 kB 00:00
epel/primary_db | 5.9 MB 00:13
http://repos.fedorapeople.org/repos/peter/erlang/epel-6/x86_64/repodata/repomd.xml: [Errno 14] PYCURL ERROR 22 - "The requested URL returned error: 404 Not Found"
Trying other mirror.
To address this issue please refer to the below knowledge base article

https://access.redhat.com/articles/1320623

If above article doesn't help to resolve this issue please open a ticket with Red Hat Support.

Resolving Dependencies
--> Running transaction check
---> Package docker-io.x86_64 0:1.7.1-2.el6 will be installed
--> Processing Dependency: lxc for package: docker-io-1.7.1-2.el6.x86_64
--> Processing Dependency: libcgroup for package: docker-io-1.7.1-2.el6.x86_64
--> Running transaction check
---> Package libcgroup.x86_64 0:0.40.rc1-23.el6 will be installed
---> Package lxc.x86_64 0:1.0.9-1.el6 will be installed
--> Processing Dependency: lua-lxc(x86-64) = 1.0.9-1.el6 for package: lxc-1.0.9-1.el6.x86_64
--> Processing Dependency: lua-alt-getopt for package: lxc-1.0.9-1.el6.x86_64
--> Processing Dependency: liblxc.so.1()(64bit) for package: lxc-1.0.9-1.el6.x86_64
--> Running transaction check
---> Package lua-alt-getopt.noarch 0:0.7.0-1.el6 will be installed
---> Package lua-lxc.x86_64 0:1.0.9-1.el6 will be installed
--> Processing Dependency: lua-filesystem for package: lua-lxc-1.0.9-1.el6.x86_64
---> Package lxc-libs.x86_64 0:1.0.9-1.el6 will be installed
--> Running transaction check
---> Package lua-filesystem.x86_64 0:1.4.2-1.el6 will be installed
--> Finished Dependency Resolution

Dependencies Resolved

================================================================================================================================================================================================================================
Package Arch Version Repository Size
================================================================================================================================================================================================================================
Installing:
docker-io x86_64 1.7.1-2.el6 epel 4.6 M
Installing for dependencies:
libcgroup x86_64 0.40.rc1-23.el6 base 131 k
lua-alt-getopt noarch 0.7.0-1.el6 epel 6.9 k
lua-filesystem x86_64 1.4.2-1.el6 epel 24 k
lua-lxc x86_64 1.0.9-1.el6 epel 16 k
lxc x86_64 1.0.9-1.el6 epel 122 k
lxc-libs x86_64 1.0.9-1.el6 epel 257 k

Transaction Summary
================================================================================================================================================================================================================================
Install 7 Package(s)

Total download size: 5.1 M
Installed size: 20 M

Is this ok [y/N]: y

Downloading Packages:
(1/7): docker-io-1.7.1-2.el6.x86_64.rpm | 4.6 MB 00:10
(2/7): libcgroup-0.40.rc1-23.el6.x86_64.rpm | 131 kB 00:00
(3/7): lua-alt-getopt-0.7.0-1.el6.noarch.rpm | 6.9 kB 00:00
(4/7): lua-filesystem-1.4.2-1.el6.x86_64.rpm | 24 kB 00:00
(5/7): lua-lxc-1.0.9-1.el6.x86_64.rpm | 16 kB 00:00
(6/7): lxc-1.0.9-1.el6.x86_64.rpm | 122 kB 00:00
(7/7): lxc-libs-1.0.9-1.el6.x86_64.rpm | 257 kB 00:00
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Total 457 kB/s | 5.1 MB 00:11
warning: rpmts_HdrFromFdno: Header V3 RSA/SHA256 Signature,key ID 0608b895: NOKEY
Retrieving key from file:///etc/pki/rpm-gpg/RPM-GPG-KEY-EPEL-6
Importing GPG key 0x0608B895:
Userid : EPEL (6) <epel@fedoraproject.org>
Package: epel-release-6-8.noarch (installed)
From : /etc/pki/rpm-gpg/RPM-GPG-KEY-EPEL-6

Is this ok [y/N]: y

Running rpm_check_debug
Running Transaction Test
Transaction Test Succeeded
Running Transaction
Warning: RPMDB altered outside of yum.
Installing : lxc-libs-1.0.9-1.el6.x86_64 1/7
Installing : lua-filesystem-1.4.2-1.el6.x86_64 2/7
Installing : lua-lxc-1.0.9-1.el6.x86_64 3/7
Installing : libcgroup-0.40.rc1-23.el6.x86_64 4/7
Installing : lua-alt-getopt-0.7.0-1.el6.noarch 5/7
Installing : lxc-1.0.9-1.el6.x86_64 6/7
Installing : docker-io-1.7.1-2.el6.x86_64 7/7
Verifying : lua-lxc-1.0.9-1.el6.x86_64 1/7
Verifying : lxc-libs-1.0.9-1.el6.x86_64 2/7
Verifying : lxc-1.0.9-1.el6.x86_64 3/7
Verifying : docker-io-1.7.1-2.el6.x86_64 4/7
Verifying : lua-alt-getopt-0.7.0-1.el6.noarch 5/7
Verifying : libcgroup-0.40.rc1-23.el6.x86_64 6/7
Verifying : lua-filesystem-1.4.2-1.el6.x86_64 7/7

Installed:
docker-io.x86_64 0:1.7.1-2.el6

Dependency Installed:
libcgroup.x86_64 0:0.40.rc1-23.el6 lua-alt-getopt.noarch 0:0.7.0-1.el6 lua-filesystem.x86_64 0:1.4.2-1.el6 lua-lxc.x86_64 0:1.0.9-1.el6 lxc.x86_64 0:1.0.9-1.el6 lxc-libs.x86_64 0:1.0.9-1.el6

Complete!

[root@bogon docker]# docker -v

Docker version 1.7.1,build 786b29d/1.7.1


安装完成！

版权声明：本文内容由互联网用户自发贡献，该文观点与技术仅代表作者本人。本站仅提供信息存储空间服务，不拥有所有权，不承担相关法律责任。如发现本站有涉嫌侵权/违法违规的内容， 请发送邮件至 dio@foxmail.com 举报，一经查实，本站将立刻删除。

相关推荐

elasticsearch 开机自启
linux下开机自启： 在/etc/init.d目录下新建文件elasticsearch 并敲入shell脚本： 注意， 前两行必须填写，且要注释掉。 第一行为shell前行代码，目的告诉系统使用shell。 第二行分别代表运行级别、启动优先权、关闭优先权，且后面添加开机服务会用到。 shell脚本
centos7 开机自动执行脚本
1、因为在centos7中/etc/rc.d/rc.local的权限被降低了，所以需要赋予其可执行权 chmod +x /etc/rc.d/rc.local 2、赋予脚本可执行权限假设/usr/local/script/autostart.sh是你的脚本路径，给予执行权限 chmod +x /usr
centos 目录磁盘使用情况
最简单的查看方法可以使用ls -ll、ls-lh命令进行查看，当使用ls -ll，会显示成字节大小，而ls- lh会以KB、MB等为单位进行显示，这样比较直观一些。 通过命令du -h –max-depth=1 *，可以查看当前目录下各文件、文件夹的大小，这个比较实用。 查询当前目录总大小可以使用d
centos7 守护进程
ASP.NET Core应用程序发布linux在shell中运行是正常的。可一但shell关闭网站也就关闭了，所以要配置守护进程， 用的是Supervisor，本文主要记录配置的过程和过程遇到的问题 安装Supervisor&#160;1 yum install python-setuptools
Centos 同步时间
设置时区（CentOS 7） 先执行命令timedatectl status|grep &#39;Time zone&#39;查看当前时区，如果不是时区（Asia/Shanghai），则需要先设置为中国时区，否则时区不同会存在时差。 #已经是Asia/Shanghai，则无需设置 [root@xia
Centos 固定ip
vim&#160;/etc/sysconfig/network-scripts/ifcfg-eth0 BOOTPROTO=&quot;static&quot; ONBOOT=yes IPADDR=192.168.8.106 NETMASK=255.255.252.0 GATEWAY=192.168.
centos7 安装redis
一、安装gcc依赖 由于 redis 是用 C 语言开发，安装之前必先确认是否安装 gcc 环境（gcc -v），如果没有安装，执行以下命令进行安装 [root@localhost local]# yum install -y gcc 二、下载并解压安装包 [root@localhost local
netcore linux ffmpeg 首帧图
第一步 On CentOS/RHEL 6.*: $ sudo rpm -Uvh http://li.nux.ro/download/nux/dextop/el6/x86_64/nux-dextop-release-0-2.el6.nux.noarch.rpm On CentOS/RHEL 7: $
netcore 图片缩略图
/// &lt;summary&gt; /// 取小写文件名后缀 /// &lt;/summary&gt; /// &lt;param name=&quot;name&quot;&gt;文件名&lt;/param&gt; /// &lt;returns&gt;返回小写后缀，不带“.”&lt;/ret
.net core 与ELK（4）后台运行els可视化工具和Kibana
which nohup .bash_profile中并source加载 如果没有就安装吧 yum provides */nohup nohup npm run start &amp; nohup ./kibana &amp;
Centos安装mysql57
1.1 MySQL安装 1.1.1 下载wget命令 yum -y install wget 1.1.2 在线下载mysql安装包 wget https://dev.mysql.com/get/mysql57-community-release-el7-8.noarch.rpm 1.1.3 安装My
CentOS 系统管理与yum软件仓库搭建
重启 reboot shutdown -r now init 6 关闭 init 0 shutdown -h now shutdown -h 20：25 #8点25关机查看内存 free CPU利用率 top 日期 date 设置时间 date 033017002015 #月日时间年 日历 cal
CentOS 防火墙
1、firewalld的基本使用 启动： systemctl start firewalld 关闭： systemctl stop firewalld 查看状态： systemctl status firewalld 开机禁用 ： systemctl disable firewalld 开机启用 ：
Centos 查找命令路径
which docker
centos7 安装mysql5.7
1 下载并安装MySQL官方的&#160;Yum Repository wget -i -c http://dev.mysql.com/get/mysql57-community-release-el7-10.noarch.rpm 使用上面的命令就直接下载了安装用的Yum Repository，大概
CentOS6/7 配置守护进程
CentOS6.x CentOS6中转用Upstrat代替以前的init.d/rcX.d的线性启动方式。 一、相关命令 通过initctl help可以查看相关命令 [root@localhost ~]# initctl help Job commands: start Start job. sto
centos 磁盘满
1、使用命令：df -lk 找到已满磁盘 2、使用命令：du --max-depth=1 -h 查找大文件，删除
CentOS 网络操作
ifconfig：查看网卡信息 网卡配置文件位置： /etc/sysconfig/network-scripts/文件夹 nmtui：配置网卡 netstat -tlunp：查看端口信息 端口信息存储位置： /etc/services文件 route：查看路由信息 wget：下载网路文件，例如 wg
CentOS 进程操作
ps -ef：查看所有进程，&#160;ps -ef |grap firewalld 查看与firewalld相关的进程 which ：查看进程：which firewalld kill 进程id：杀掉进程 kill 640，强制杀：kill -9 640 man：查看帮助，例如 man ps 查看
CentOS 用户/组与权限
useradd：添加用户 useradd abc，默认添加一个abc组 vipw：查看系统中用户 groupadd：添加组groupadd ccna vigr：查看系统中的组 gpasswd：将用户abc添加到ccna组 gpasswd -a abc ccna groups abc：查看用户abc属
pythonJavaScriptjavaHTMLPHPreactjsC#AndroidCSSNode.jssqlrpython-3.xMysqLjQueryc++pandasFlutterangularIOSdjangolinuxswifttypescript路由器JSON路由器设置无线路由器h3c华三华三路由器设置华三路由器电脑软件教程arraysdocker软件图文教程Cvue.jslaravelspring-boot