操作记录:在ubuntu16.04.1配置fuse开发环境及fuse开发规范测试

1、使用ssh客户端,登陆ubuntu

ssh-p2206root@127.0.0.1

2、下载fuse源码,进行编译,安装(当前工作目录为~)

wgethttps://github.com/libfuse/libfuse/releases/download/fuse-3.0.0rc3/fuse-3.0.0rc3.tar.gz
tarxvffuse-3.0.0rc3.tar.gz
cdfuse-3.0.0rc3/
./configure
make-j8
makeinstall
depmod
modprobefuse

3、测试example\hello_ll是否能正常工作

cdexample/
./hello_ll--help
./hello_ll/mnt
mount
cd/mnt
ls
cathello
cd
umount/mnt
  • 针对example\hello_ll.c,进行改动测试:


1、在根目录下多创建一个文件出来,节点号定为5,名称为frombyte,内容为文本"http://www.datahf.net"

改动如下:

/*
FUSE:FilesysteminUserspace
Copyright(C)2001-2007MiklosSzeredi<miklos@szeredi.hu>

ThisprogramcanbedistributedunderthetermsoftheGNUGPL.
SeethefileCOPYING.
*/

/**@file
*
*minimalexamplefilesystemusinglow-levelAPI
*
*Compilewith:
*
*gcc-Wallhello_ll.c`pkg-configfuse3--cflags--libs`-ohello_ll
*
*##Sourcecode##
*\includehello_ll.c
*/

#defineFUSE_USE_VERSION30

#include<config.h>

#include<fuse_lowlevel.h>
#include<stdio.h>
#include<stdlib.h>
#include<string.h>
#include<errno.h>
#include<fcntl.h>
#include<unistd.h>
#include<assert.h>

staticconstchar*hello_str="HelloWorld!\n";
staticconstchar*hello_name="hello";
//change1#0
staticconstchar*inode5_str="http://www.datahf.net!\n";
staticconstchar*inode5_name="frombyte";
//changeend
staticinthello_stat(fuse_ino_tino,structstat*stbuf)
{
	stbuf->st_ino=ino;
	switch(ino){
	case1:
		stbuf->st_mode=S_IFDIR|0755;
		stbuf->st_nlink=2;
		break;

	case2:
		stbuf->st_mode=S_IFREG|0444;
		stbuf->st_nlink=1;
		stbuf->st_size=strlen(hello_str);
		break;

//change1#1
case5:
stbuf->st_mode=S_IFREG|0444;
stbuf->st_nlink=1;
stbuf->st_size=strlen(inode5_str);
break;
//change1end

	default:
		return-1;
	}
	return0;
}

staticvoidhello_ll_getattr(fuse_req_treq,fuse_ino_tino,structfuse_file_info*fi)
{
	structstatstbuf;

	(void)fi;

	memset(&stbuf,sizeof(stbuf));
	if(hello_stat(ino,&stbuf)==-1)
		fuse_reply_err(req,ENOENT);
	else
		fuse_reply_attr(req,&stbuf,1.0);
}

staticvoidhello_ll_lookup(fuse_req_treq,fuse_ino_tparent,constchar*name)
{
	structfuse_entry_parame;
//change1#2
/*
if(parent!=1||strcmp(name,hello_name)!=0)
fuse_reply_err(req,ENOENT);
else{
memset(&e,sizeof(e));
e.ino=2;
e.attr_timeout=1.0;
e.entry_timeout=1.0;
hello_stat(e.ino,&e.attr);

fuse_reply_entry(req,&e);
}*/


if(parent!=1)
		fuse_reply_err(req,ENOENT);
	elseif(strcmp(name,hello_name)==0){
		memset(&e,sizeof(e));
		e.ino=2;
		e.attr_timeout=1.0;
		e.entry_timeout=1.0;
		hello_stat(e.ino,&e.attr);
		fuse_reply_entry(req,&e);
	}
elseif(strcmp(name,inode5_name)==0){
memset(&e,sizeof(e));
e.ino=5;
e.attr_timeout=1.0;
e.entry_timeout=1.0;
hello_stat(e.ino,&e.attr);
fuse_reply_entry(req,&e);
}
else
fuse_reply_err(req,ENOENT);
//change1end
}

structdirbuf{
	char*p;
	size_tsize;
};

staticvoiddirbuf_add(fuse_req_treq,structdirbuf*b,constchar*name,fuse_ino_tino)
{
	structstatstbuf;
	size_toldsize=b->size;
	b->size+=fuse_add_direntry(req,NULL,name,0);
	b->p=(char*)realloc(b->p,b->size);
	memset(&stbuf,sizeof(stbuf));
	stbuf.st_ino=ino;
	fuse_add_direntry(req,b->p+oldsize,b->size-oldsize,b->size);
}

#definemin(x,y)((x)<(y)?(x):(y))

staticintreply_buf_limited(fuse_req_treq,constchar*buf,size_tbufsize,off_toff,size_tmaxsize)
{
	if(off<bufsize)
		returnfuse_reply_buf(req,buf+off,min(bufsize-off,maxsize));
	else
		returnfuse_reply_buf(req,0);
}

staticvoidhello_ll_readdir(fuse_req_treq,size_tsize,structfuse_file_info*fi)
{
	(void)fi;

	if(ino!=1)
		fuse_reply_err(req,ENOTDIR);
	else{
		structdirbufb;

		memset(&b,sizeof(b));
		dirbuf_add(req,&b,".",1);
		dirbuf_add(req,"..",hello_name,2);
//change1
dirbuf_add(req,inode5_name,5);
//end
		reply_buf_limited(req,b.p,b.size,off,size);
		free(b.p);
	}
}

staticvoidhello_ll_open(fuse_req_treq,structfuse_file_info*fi)
{
//change1
	//if(ino!=2)
if((ino!=2)&&(ino!=5))
//end
		fuse_reply_err(req,EISDIR);
	elseif((fi->flags&3)!=O_RDONLY)
		fuse_reply_err(req,EACCES);
	else
		fuse_reply_open(req,fi);
}

staticvoidhello_ll_read(fuse_req_treq,structfuse_file_info*fi)
{
	(void)fi;

//change1
	//assert(ino==2);
	//reply_buf_limited(req,hello_str,strlen(hello_str),size);
switch(ino){
case2:
reply_buf_limited(req,size);
break;
case5:
reply_buf_limited(req,inode5_str,strlen(inode5_str),size);
break;
default:
;
}
//end
}

staticstructfuse_lowlevel_opshello_ll_oper={
	.lookup		=hello_ll_lookup,.getattr	=hello_ll_getattr,.readdir	=hello_ll_readdir,.open		=hello_ll_open,.read		=hello_ll_read,};

intmain(intargc,char*argv[])
{
	structfuse_argsargs=FUSE_ARGS_INIT(argc,argv);
	structfuse_session*se;
	structfuse_cmdline_optsopts;
	intret=-1;

	if(fuse_parse_cmdline(&args,&opts)!=0)
		return1;
	if(opts.show_help){
		printf("usage:%s[options]<mountpoint>\n\n",argv[0]);
		fuse_cmdline_help();
		fuse_lowlevel_help();
		ret=0;
		gotoerr_out1;
	}elseif(opts.show_version){
		printf("FUSElibraryversion%s\n",fuse_pkgversion());
		fuse_lowlevel_version();
		ret=0;
		gotoerr_out1;
	}

	se=fuse_session_new(&args,&hello_ll_oper,sizeof(hello_ll_oper),NULL);
	if(se==NULL)
	gotoerr_out1;

	if(fuse_set_signal_handlers(se)!=0)
	gotoerr_out2;

	if(fuse_session_mount(se,opts.mountpoint)!=0)
	gotoerr_out3;

	fuse_daemonize(opts.foreground);

	/*Blockuntilctrl+corfusermount-u*/
	if(opts.singlethread)
		ret=fuse_session_loop(se);
	else
		ret=fuse_session_loop_mt(se,opts.clone_fd);

	fuse_session_unmount(se);
err_out3:
	fuse_remove_signal_handlers(se);
err_out2:
	fuse_session_destroy(se);
err_out1:
	free(opts.mountpoint);
	fuse_opt_free_args(&args);

	returnret?1:0;
}

结果测试:

cd~/fuse-3.0.0rc3/example/
make
./hello_ll/mnt
ll-i/mnt
cat/mnt/frombyte
umount/mnt

2、待续

版权声明:本文内容由互联网用户自发贡献,该文观点与技术仅代表作者本人。本站仅提供信息存储空间服务,不拥有所有权,不承担相关法律责任。如发现本站有涉嫌侵权/违法违规的内容, 请发送邮件至 dio@foxmail.com 举报,一经查实,本站将立刻删除。

相关推荐


文章浏览阅读2.3k次,点赞4次,收藏22次。最近安装了CARLA预编译版,总体过程感觉还是挺简单的,但是由于在网上找的参考资料并没有和自己遇到的情况完全一样的,所以把自己的安装过程记录下来,方便和自己一样的后来人进行安装,同时也自己作个记录留作备忘。其实预编译版的CARLA本身几乎不用什么命令行进行安装,主要步骤只有解压缩和拷贝文件,和极少的命令行安装操作。但是相关依赖以及其它的CARLA所使用的一些工具需要一起安装好,下面一起来看看安装步骤吧。_ubuntu22.04安装carla
文章浏览阅读6.3k次,点赞5次,收藏15次。在清华镜像中下载Ubuntu 20 安装包_ubuntu20下载
文章浏览阅读5k次。linux环境, python3.7.问题描述: 安装rally, pip3 install -r requirements.txt 时提示如下: 说明openssl 已安装。解决:1. pip3 install --upgrade pip , 结果输出如下 ..._error: command '/usr/bin/gcc' failed with exit code 1
文章浏览阅读1.1k次。自己刚踩坑装好的W11 WSL2 miniconda_wsl2 cuda
文章浏览阅读4.2k次,点赞4次,收藏17次。要安装这个 standalone的,会有一点区别(不识别 下面的 -localhost no)上面的命令会在~/.vnc/目录下生成一个 passwd文件。具体端口号,可以查看vncserver -list返回结果中的RFB PROT。作用是vncserver启动的时候运行这些命令,把桌面程序启动起来。如果希望用某个用户比如 demo登录,就用su切换到这个用户。桌面版默认就已安装,服务器版需要手动安装,并启动。关闭某个会话可以用下面的命令。远程地址输入ip:port。查看全部的vnc会话。_ubuntu vncserver
文章浏览阅读894次,点赞51次,收藏31次。在安卓使用vscode主要是连接一个远程的code-server服务,code-server服务安装在什么系统,调用的就是什么系统的环境,如这里使用ubuntu进行安装code-server,那使用的就是ubuntu环境,如需要go,python,java开发,需要在Ubuntu安装相关环境,创建的文件夹和项目也是在Ubuntu里面.这种方式其实在访问vscode的时候利于可以随时随地进行连接使用,且不受设备影响。
安装Ubuntu上超好用的终端Terminator。通过添加软件源、更新源、安装Terminator等步骤完成。
文章浏览阅读1.1k次,点赞83次,收藏74次。不要嫌弃Ubuntu的单调的终端界面啦,快来试试这些有意思的命令_ubuntu系统有趣的玩法
文章浏览阅读2.5k次。在ubuntu系统中,swap空间就是虚拟内存,所以考虑在磁盘空间富余的目录下设置虚拟内存swap文件,用来缓解内存不足的问题。通过上面的信息可以看到,/dev/vda2 目录下还剩余45G,那么就可以把swap文件生成在/dev/vda2目录下。在系统监控中发现,当数据库服务程序启动后,占用了大量内存空间,导致系统的剩余的内存往往只有几十MB。# bs 为块的大小,count 创建多少个块。# 执行命令后,删除创建的swap目录即可。#把生成的文件转换成 Swap 文件。2、创建一个swap文件。_ubuntu20修改swap大小
文章浏览阅读2.9k次,点赞2次,收藏10次。记录RV1126的SDK编译错误,以及解决处理_command exited with non-zero status 1
文章浏览阅读1.1w次,点赞22次,收藏101次。【记录】ubuntu20.04安装nvidia显卡驱动_ubuntu20.04安装nvidia显卡驱动
文章浏览阅读727次,点赞6次,收藏27次。在嵌入式Linux开发过程中,可能遇到uboot无法通过nfs服务从Ubuntu下载系统镜像(TTTTTT)的问题。如果你使用的是较新版本的Ubuntu,那么其**默认内核将不支持nfs2**!而**uboot仅支持到nfs2**,因此我们需要修改系统内核以及nfs配置文件,开启nfs2服务。**此问题非常棘手**,因为问题出现的时间太近,并且使用的人少。由于是2023年后才出现的问题,**chatgpt也无法解答**!本文参考网络上多篇博客资料,是解决此问题的最新办法。
ubuntu系统下安装软件的方法有多种,包括使用apt工具、deb软件包安装、源码编译安装以及通过软件中心安装。还有一种以 .run 后缀的软件包也可以在ubuntu系统下安装。具体的安装方法可以通过百度搜索来获取。
文章浏览阅读814次。本篇目的:Xubuntu如何安装pkg-configpkg-config是一个计算机软件包,用于帮助开发人员查找、定位和使用依赖库。它通常用于构建软件时,开发人员需要指定程序所依赖的外部库的位置和版本信息。使用pkg-config,开发人员可以很容易地查找、检索和导出这些依赖库的信息,从而简化了软件的构建过程。_ubuntu中怎么下载pkg-config
文章浏览阅读2k次。ubuntu创建共享文件夹_ubuntu20.04共享文件夹
文章浏览阅读2.9k次,点赞74次,收藏73次。对于有长期远程桌面需求的用户,建议将cpolar套餐升级到专业套餐,支持配置固定的公网TCP端口,且带宽也会相应的增大,支持更高效便捷的远程桌面连接Ubuntu系统。【cpolar内网穿透支持http/https/tcp协议,支持永久免费使用,不限制流量,无需公网IP,也不用进入路由器设置,操作简单。隧道创建成功后,点击左侧仪表盘的状态——在线隧道列表,查看xrdp隧道的所生成的公网TCP端口地址,复制下来。,使用cpolar内网穿透映射3389端口,生成公网TCP端口地址,实现在公网环境下,_ubuntu 局域网桌面
文章浏览阅读3.2k次。而在linux的ubuntu版本中,又多出两类用户:安装ubuntu系统的源用户xxx,其与root具有相同权限,仅在执行命令时,前面加sudo。在ubuntu中,用命令deluser username可以直接删除用户账号及家目录,而用centos7中的命令userdel -r username才能达到同样目的。在ubuntu中,没有moduser命令,centos7中的usermod修改用户信息的命令,同样可以用在ubuntu中。在系统中,创建新的用户或称为账号,一般需要多步操作。_ubuntu创建一个新用户
文章浏览阅读1.6w次,点赞4次,收藏23次。系统的许多日志文件都存储在 /var/log 目录中。你可以使用 ls /var/log 命令来列出可用的日志文件。/var/log/Xorg.0.log:包含 X 服务器的日志信息(图形界面)。打开DASH,搜索日志或者log,打开app,这个是/var/log的界面版。这将显示系统日志的末尾,并提供有关系统崩溃和错误的信息。/var/log/kern.log:包含内核日志信息。/var/log/dmesg:包含开机时的日志信息。/var/log/syslog:包含系统日志信息。_ubuntu查看系统日志
文章浏览阅读857次。首先将source.list复制为source.list.bak备份,然后将source.list内容改为需要的镜像源列表即可。Ubuntu采用apt作为软件安装工具,其镜像源列表记录在/etc/apt/source.list文件中。本节均为 Ubuntu 20.04 的镜像源列表。若为其他版本,将所有focal更改为其他版本代号即可。_apt 国内源