Ubuntu16.10偶遇linux0.11

转自:http://www.mamicode.com/info-detail-1321279.html

标签:

Ubuntu16.10偶遇linux0.11

编译环境

  • Ubuntu 16.10
  • gcc 5.2.1

问题集锦

1.

as86 -0 -a -o boot/bootsect.o boot/bootsect.s
make: as86:命令未找到
Makefile:92: recipe for target ‘boot/bootsect’ failed
make: * [boot/bootsect] Error 127

#解决:下载bin86包 sudo aptitude install bin86

2.

gas -c -o boot/head.o boot/head.s
make: gas:命令未找到
Makefile:34: recipe for target ‘boot/head.o’ failed
make: * [boot/head.o] Error 127

#解决:把所有Makefile的gas改为as --32,执行下面命令后忽略输出信息就行了。还有个gar,这里一起修改了 find -name "Makefile" | xargs -ti sed -i s/gas/as --32/g {} \; find -name "Makefile" | xargs -ti sed -i s/gar/ar/g {} \;

3.

as –32 -c -o boot/head.o boot/head.s
boot/head.s: Assembler messages:
boot/head.s:231: Error: alignment not a power of 2
Makefile:34: recipe for target ‘boot/head.o’ failed
make: * [boot/head.o] Error 1

#解决:对齐要是2的倍数,就是align 4,8,16,等等 #把.align 2改为.align 4 #把.align 3改为.align 8 sed -i s/align 2/align 4/g boot/head.s; sed -i s/align 3/align 8/g boot/head.s

4.

as –32 -c -o boot/head.o boot/head.s
gcc -Wall -O -g -fstrength-reduce -fomit-frame-pointer -fcombine-regs \
-nostdinc -Iinclude -c -o init/main.o init/main.c
gcc: error: unrecognized command line option ‘-fcombine-regs’
Makefile:36: recipe for target ‘init/main.o’ failed
make: * [init/main.o] Error 1

#同理 find -name "Makefile" | xargs -ti sed -i s/-fcombine-regs//g‘ {} \;

5.

In file included from init/main.c:8:0:
init/main.c:23:29: error: static declaration of ‘fork’ follows non-static declaration
static inline _syscall0(int,fork)

#把static去掉 sed -i s/static inline/inline/g init/main.c

6.

init/main.c: Assembler messages:
init/main.c:138: Error: invalid instruction suffix for push‘
init/main.c:139: Error: invalid instruction suffix for
push’
init/main.c:140: Error: invalid instruction suffix for pushf‘
init/main.c:141: Error: invalid instruction suffix for
push’
init/main.c:142: Error: invalid instruction suffix for `push’

To build a binary for x86 on 64 bit machine,you will need to install 32 bit c library as well. One way to do this is to install gcc/g++ multilib.

If you don't need x86 library,you can remove linux_x86 platform in the build.gradle as you already did.

#使用了gcc64位编译了,应该用32位,加上-m32这个选项就行了 #注意要使用-m32这个选项还需要安装一些相关的库,具体的我忘记了 find -name "Makefile" | xargs -ti sed -i s/gcc/gcc -m32 /g {} \; sudo apt-get install gcc-multilib sudo apt-get install g++-multilib


编译报错:

boot/head.s:43: Error: unsupported instruction `mov'
boot/head.s:161: Error: invalid instruction suffix for `push'
boot/head.s:163: Error: invalid instruction suffix for `pop'

出错原因:64位系统原因

解决方案:

修改head.s,在文件前加.code32


7

../include/string.h: In function ‘strcpy’:
../include/string.h:29:1: error: ‘asm’ operand has impossible constraints
asm(“cld\n”
^
Makefile:24: recipe for target ‘traps.o’ failed
make[1]: * [traps.o] Error 1
make[1]: Leaving directory ‘/opt/linux-gdb/linux/kernel’
Makefile:76: recipe for target ‘kernel/kernel.o’ failed
make: * [kernel/kernel.o] Error 2

##不需要制定哪些寄存器会改变了,所以把__asm__("":::***),这里的***寄存器删掉把。 ##一般直接复制下面的执行就行了 ##精髓。。哈哈 sed -i s/\(:*.*:*\):.*);$/\1);/g include/string.h sed -i s/:"dx")/)/g include/linux/sched.h sed -i 55s/\(:*.*:*\):.*)$/\1)/g mm/memory.c sed -i 81s/\(:*.*:*\):.*);$/\1);/g mm/memory.c sed -i 288s/\(:*.*:*\):.*)$/\1)/g fs/buffer.c sed -i 76s/\(:*.*:*\):.*);$/\1);/g mm/memory.c sed -i 17s/\(:*.*:*\):.*)$/\1)/g fs/bitmap.c sed -i 44s/\(:*.*:*\):.*);/\1);/g fs/bitmap.c sed -i 158s/\(:*.*:*\):.*)/\1)/g kernel/blk_drv/floppy.c sed -i 62s/\(:*.*:*\):.*)/\1)/g kernel/blk_drv/hd.c sed -i 65s/\(:*.*:*\):.*)/\1)/g kernel/blk_drv/hd.c sed -i 12s/\(:*.*:*\):.*);/\1);/g include/asm/memory.h sed -i s/\(:*.*:*\):.*);$/\1);/g kernel/chr_drv/console.c

8.

gld -r -o kernel.o sched.o system_call.o traps.o asm.o fork.o panic.o printk.o vsprintf.o sys.o exit.o signal.o mktime.o
make[1]: gld:命令未找到
Makefile:32: recipe for target ‘kernel.o’ failed
make[1]: * [kernel.o] Error 127
make[1]: Leaving directory ‘/opt/linux-gdb/linux/kernel’
Makefile:76: recipe for target ‘kernel/kernel.o’ failed
make: * [kernel/kernel.o] Error 2

find -name "Makefile" | xargs -ti sed -i s/gld/ld -melf_i386/g {} \;

9.

/opt/linux-gdb/linux/kernel/../include/string.h:396: `memset’被多次定义
traps.o:/opt/linux-gdb/linux/kernel/../include/string.h:396:第一次在此定义
Makefile:32: recipe for target ‘kernel.o’ failed
make[1]: * [kernel.o] Error 1
make[1]: Leaving directory ‘/opt/linux-gdb/linux/kernel’
Makefile:76: recipe for target ‘kernel/kernel.o’ failed
make: * [kernel/kernel.o] Error 2

#把extern inline 改为static extern find -name "*.h" | xargs -ti sed -i s/extern inline/static inline/g {} \;

10.

gcc -m32 -Wall -O g -fstrength-reduce -fomit-frame-pointer -nostdinc -I../include \
-c -o open.o open.c
gcc: error: g: 没有那个文件或目录
Makefile:13: recipe for target ‘open.o’ failed
make[1]: * [open.o] Error 1
make[1]: Leaving directory ‘/opt/linux-gdb/linux/fs’
Makefile:82: recipe for target ‘fs/fs.o’ failed
make: * [fs/fs.o] Error 2

#-O g改为-O -g find -name "Makefile" | xargs -ti sed -i s/-O g/-O -g/g {} \;

11

exec.c: In function ‘copy_strings’:
exec.c:145:44: error: lvalue required as left operand of assignment
!(pag = (char *) page[p/PAGE_SIZE] =
^
exec.c: In function ‘do_execve’:
exec.c:245:3: warning: suggest parentheses around assignment used as truth value [-Wparentheses]
if (cp = strchr(buf,‘\n’)) {
^
Makefile:13: recipe for target ‘exec.o’ failed
make[1]: * [exec.o] Error 1
make[1]: Leaving directory ‘/opt/linux-gdb/linux/fs’
Makefile:82: recipe for target ‘fs/fs.o’ failed
make: * [fs/fs.o] Error 2

#替换成下面这一行 if (!(pag = (char *) page[p/PAGE_SIZE]) && !(pag = (char *) (page[p/PAGE_SIZE] = (unsigned long *) get_free_page()))) 

11.

gcc -m32 -E -nostdinc -I../../include -traditional keyboard.S -o keyboard.s
as –32 -c -o keyboard.o keyboard.s
keyboard.S: Assembler messages:
keyboard.S:47: Error: %al‘ not allowed withxorl’
keyboard.S:53: Warning: indirect call without `*’
Makefile:22: recipe for target ‘keyboard.o’ failed
make[1]: * [keyboard.o] Error 1
make[1]: Leaving directory ‘/opt/linux-gdb/linux/kernel/chr_drv’
Makefile:73: recipe for target ‘kernel/chr_drv/chr_drv.a’ failed
make: * [kernel/chr_drv/chr_drv.a] Error 2

sed -i s/xorl/xor/g kernel/chr_drv/keyboard.S

12.

alloc.c:133:3: warning: function with qualified void return type called
panic(“malloc: bad arg”);
^
malloc.c:156:46: error: lvalue required as left operand of assignment
bdesc->page = bdesc->freeptr = (void *) cp = get_free_page();
^

#改为这个 bdesc->page = bdesc->freeptr = (void *) (cp = (char*)get_free_page());

13.

(.init.text+0xca7):对‘__stack_chk_fail’未定义的引用
init/built-in.o: In function do_header‘:
initramfs.c.init.text+0x4343):对‘__stack_chk_fail’未定义的引用
arch/i386/kernel/built-in.o.text+0x54c6): more undefined references to
__stack_chk_fail’ follow
make[1]: * [.tmp_vmlinux1] 错误 1
make[1]: Leaving directory `/usr/src/linux-2.6.17.10’
make: * [debian/stamp-build-kernel] 错误 2

#在每一个Makefile里找到CFLAGS然后添加-fno-stack-protector标志!!!  find -name "Makefile" | xargs -ti sed s/-Wall/-Wall -fno-stack-protector/g {} \;

13.

ld: warning: cannot find entry symbol _start; defaulting to 0000000000000000
kernel/chr_drv/chr_drv.a(console.o):在函数‘con_write’中:
/opt/linux-gdb/linux/kernel/chr_drv/console.c:461:对‘attr’未定义的引用
Makefile:59: recipe for target ‘tools/system’ failed
make: * [tools/system] Error 1

#把attr改为¥0x07

14.

/tmp/ccQ4qmOC.o:在函数‘main’中:
/opt/linux-gdb/linux/tools/build.c:72:对‘MAJOR’未定义的引用
/opt/linux-gdb/linux/tools/build.c:73:对‘MINOR’未定义的引用
collect2: error: ld returned 1 exit status
Makefile:52: recipe for target ‘tools/build’ failed
make: * [tools/build] Error 1

##用下面这两行替换"#include <linux/fs.h>" #define MAJOR(a) (((unsigned)(a))>>8) #define MINOR(a) ((a)&0xff)

16.

tools/build boot/bootsect boot/setup system.tmp /dev/fd1 > Image
/dev/fd1: No such file or directory
Couldn’t stat root device.
Makefile:42: recipe for target ‘Image’ failed
make: * [Image] Error 1

##检查根设备是否存在 ##这里我把赵炯老师的rootimage-0.11==>/dev/fd1 sudo dd if=rootimage-0.11 of=/dev/fd1

17.

Boot sector 512 bytes.
Setup is 312 bytes.
Non-Gcc header of ‘system’
make: * [Image] Error 1

解决办法: 将第一层主 Makefile 文件中的 LDFLAGS =-s -x -M 修改为 LDFLAGS =-m elf_i386 -Ttext 0 Image: boot/bootsect boot/setup tools/system tools/build tools/build boot/bootsect boot/setup tools/system $(ROOT_DEV) > Image sync 修改为 Image: boot/bootsect boot/setup tools/system tools/build objcopy -O binary -R .note -R .comment tools/system tools/kernel tools/build boot/bootsect boot/setup tools/kernel $(ROOT_DEV) > Image rm tools/kernel -f sync  tools/build.c 文件中的 if (((long *) buf)[5] != 0) die("Non-GCC header of ‘system‘"); 这段代码注释掉 //if (((long *) buf)[5] != 0) // die("Non-GCC header of ‘system‘");

版权声明:本文内容由互联网用户自发贡献,该文观点与技术仅代表作者本人。本站仅提供信息存储空间服务,不拥有所有权,不承担相关法律责任。如发现本站有涉嫌侵权/违法违规的内容, 请发送邮件至 dio@foxmail.com 举报,一经查实,本站将立刻删除。

相关推荐


文章浏览阅读2.3k次,点赞4次,收藏22次。最近安装了CARLA预编译版,总体过程感觉还是挺简单的,但是由于在网上找的参考资料并没有和自己遇到的情况完全一样的,所以把自己的安装过程记录下来,方便和自己一样的后来人进行安装,同时也自己作个记录留作备忘。其实预编译版的CARLA本身几乎不用什么命令行进行安装,主要步骤只有解压缩和拷贝文件,和极少的命令行安装操作。但是相关依赖以及其它的CARLA所使用的一些工具需要一起安装好,下面一起来看看安装步骤吧。_ubuntu22.04安装carla
文章浏览阅读6.3k次,点赞5次,收藏15次。在清华镜像中下载Ubuntu 20 安装包_ubuntu20下载
文章浏览阅读5k次。linux环境, python3.7.问题描述: 安装rally, pip3 install -r requirements.txt 时提示如下: 说明openssl 已安装。解决:1. pip3 install --upgrade pip , 结果输出如下 ..._error: command '/usr/bin/gcc' failed with exit code 1
文章浏览阅读1.1k次。自己刚踩坑装好的W11 WSL2 miniconda_wsl2 cuda
文章浏览阅读4.2k次,点赞4次,收藏17次。要安装这个 standalone的,会有一点区别(不识别 下面的 -localhost no)上面的命令会在~/.vnc/目录下生成一个 passwd文件。具体端口号,可以查看vncserver -list返回结果中的RFB PROT。作用是vncserver启动的时候运行这些命令,把桌面程序启动起来。如果希望用某个用户比如 demo登录,就用su切换到这个用户。桌面版默认就已安装,服务器版需要手动安装,并启动。关闭某个会话可以用下面的命令。远程地址输入ip:port。查看全部的vnc会话。_ubuntu vncserver
文章浏览阅读894次,点赞51次,收藏31次。在安卓使用vscode主要是连接一个远程的code-server服务,code-server服务安装在什么系统,调用的就是什么系统的环境,如这里使用ubuntu进行安装code-server,那使用的就是ubuntu环境,如需要go,python,java开发,需要在Ubuntu安装相关环境,创建的文件夹和项目也是在Ubuntu里面.这种方式其实在访问vscode的时候利于可以随时随地进行连接使用,且不受设备影响。
安装Ubuntu上超好用的终端Terminator。通过添加软件源、更新源、安装Terminator等步骤完成。
文章浏览阅读1.1k次,点赞83次,收藏74次。不要嫌弃Ubuntu的单调的终端界面啦,快来试试这些有意思的命令_ubuntu系统有趣的玩法
文章浏览阅读2.5k次。在ubuntu系统中,swap空间就是虚拟内存,所以考虑在磁盘空间富余的目录下设置虚拟内存swap文件,用来缓解内存不足的问题。通过上面的信息可以看到,/dev/vda2 目录下还剩余45G,那么就可以把swap文件生成在/dev/vda2目录下。在系统监控中发现,当数据库服务程序启动后,占用了大量内存空间,导致系统的剩余的内存往往只有几十MB。# bs 为块的大小,count 创建多少个块。# 执行命令后,删除创建的swap目录即可。#把生成的文件转换成 Swap 文件。2、创建一个swap文件。_ubuntu20修改swap大小
文章浏览阅读2.9k次,点赞2次,收藏10次。记录RV1126的SDK编译错误,以及解决处理_command exited with non-zero status 1
文章浏览阅读1.1w次,点赞22次,收藏101次。【记录】ubuntu20.04安装nvidia显卡驱动_ubuntu20.04安装nvidia显卡驱动
文章浏览阅读727次,点赞6次,收藏27次。在嵌入式Linux开发过程中,可能遇到uboot无法通过nfs服务从Ubuntu下载系统镜像(TTTTTT)的问题。如果你使用的是较新版本的Ubuntu,那么其**默认内核将不支持nfs2**!而**uboot仅支持到nfs2**,因此我们需要修改系统内核以及nfs配置文件,开启nfs2服务。**此问题非常棘手**,因为问题出现的时间太近,并且使用的人少。由于是2023年后才出现的问题,**chatgpt也无法解答**!本文参考网络上多篇博客资料,是解决此问题的最新办法。
ubuntu系统下安装软件的方法有多种,包括使用apt工具、deb软件包安装、源码编译安装以及通过软件中心安装。还有一种以 .run 后缀的软件包也可以在ubuntu系统下安装。具体的安装方法可以通过百度搜索来获取。
文章浏览阅读814次。本篇目的:Xubuntu如何安装pkg-configpkg-config是一个计算机软件包,用于帮助开发人员查找、定位和使用依赖库。它通常用于构建软件时,开发人员需要指定程序所依赖的外部库的位置和版本信息。使用pkg-config,开发人员可以很容易地查找、检索和导出这些依赖库的信息,从而简化了软件的构建过程。_ubuntu中怎么下载pkg-config
文章浏览阅读2k次。ubuntu创建共享文件夹_ubuntu20.04共享文件夹
文章浏览阅读2.9k次,点赞74次,收藏73次。对于有长期远程桌面需求的用户,建议将cpolar套餐升级到专业套餐,支持配置固定的公网TCP端口,且带宽也会相应的增大,支持更高效便捷的远程桌面连接Ubuntu系统。【cpolar内网穿透支持http/https/tcp协议,支持永久免费使用,不限制流量,无需公网IP,也不用进入路由器设置,操作简单。隧道创建成功后,点击左侧仪表盘的状态——在线隧道列表,查看xrdp隧道的所生成的公网TCP端口地址,复制下来。,使用cpolar内网穿透映射3389端口,生成公网TCP端口地址,实现在公网环境下,_ubuntu 局域网桌面
文章浏览阅读3.2k次。而在linux的ubuntu版本中,又多出两类用户:安装ubuntu系统的源用户xxx,其与root具有相同权限,仅在执行命令时,前面加sudo。在ubuntu中,用命令deluser username可以直接删除用户账号及家目录,而用centos7中的命令userdel -r username才能达到同样目的。在ubuntu中,没有moduser命令,centos7中的usermod修改用户信息的命令,同样可以用在ubuntu中。在系统中,创建新的用户或称为账号,一般需要多步操作。_ubuntu创建一个新用户
文章浏览阅读1.6w次,点赞4次,收藏23次。系统的许多日志文件都存储在 /var/log 目录中。你可以使用 ls /var/log 命令来列出可用的日志文件。/var/log/Xorg.0.log:包含 X 服务器的日志信息(图形界面)。打开DASH,搜索日志或者log,打开app,这个是/var/log的界面版。这将显示系统日志的末尾,并提供有关系统崩溃和错误的信息。/var/log/kern.log:包含内核日志信息。/var/log/dmesg:包含开机时的日志信息。/var/log/syslog:包含系统日志信息。_ubuntu查看系统日志
文章浏览阅读857次。首先将source.list复制为source.list.bak备份,然后将source.list内容改为需要的镜像源列表即可。Ubuntu采用apt作为软件安装工具,其镜像源列表记录在/etc/apt/source.list文件中。本节均为 Ubuntu 20.04 的镜像源列表。若为其他版本,将所有focal更改为其他版本代号即可。_apt 国内源