CentOS 7安装完后无法上网的解决办法

发现问题:

[root@mydocker network-scripts]# wget http://mirrors.163.com/.help/CentOS7-Base-163.repo
--2016-10-01 09:43:12-- http://mirrors.163.com/.help/CentOS7-Base-163.repo
正在解析主机 mirrors.163.com (mirrors.163.com)... 失败:未知的名称或服务。
wget: 无法解析主机地址 “mirrors.163.com”
[root@mydocker network-scripts]# yum update
已加载插件:fastestmirror,langpacks
http://mirrors.163.com/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#6 - "Could not resolve host: mirrors.163.com; 未知的错误"
正在尝试其它镜像。




One of the configured repositories failed (CentOS-7 - Base - 163.com),
and yum doesn't have enough cached data to continue. At this point the only
safe thing yum can do is fail. There are a few ways to work "fix" this:


1. Contact the upstream for the repository and get them to fix the problem.


2. Reconfigure the baseurl/etc. for the repository,to point to a working
upstream. This is most often useful if you are using a newer
distribution release than is supported by the repository (and the
packages for the previous distribution release still work).


3. Disable the repository,so yum won't use it by default. Yum will then
just ignore the repository until you permanently enable it again or use
--enablerepo for temporary usage:


yum-config-manager --disable base


4. Configure the failing repository to be skipped,if it is unavailable.
Note that yum will try to contact the repo. when it runs most commands,
so will have to try and fail each time (and thus. yum will be be much
slower). If it is a very temporary problem though,this is often a nice
compromise:


yum-config-manager --save --setopt=base.skip_if_unavailable=true


failure: repodata/repomd.xml from base: [Errno 256] No more mirrors to try.
http://mirrors.163.com/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#6 - "Could not resolve host: mirrors.163.com; 未知的错误"


定位问题:

根据上面的错误提示,应该是域名解析不了,那么我们需要设置CentOS 7的域名解析规则。


解决方法:

在/etc/resolv.conf文件中添加一行内容为:/etc/resolv.conf ,具体如下:

[root@mydocker yum.repos.d/etc/resolv.conf]# cat /etc/resolv.conf
nameserver 8.8.8.8


验证:

[root@mydocker network-scripts]# wget http://mirrors.163.com/.help/CentOS7-Base-163.repo
--2016-10-01 09:44:02-- http://mirrors.163.com/.help/CentOS7-Base-163.repo
正在解析主机 mirrors.163.com (mirrors.163.com)... 123.58.173.186,123.58.173.185
正在连接 mirrors.163.com (mirrors.163.com)|123.58.173.186|:80... 已连接。
已发出 HTTP 请求,正在等待回应... 200 OK
长度:1572 (1.5K) [application/octet-stream]
正在保存至: “CentOS7-Base-163.repo”


100%[=====================================================================================================================================================>] 1,572 --.-K/s 用时 0s


2016-10-01 09:44:02 (190 MB/s) - 已保存 “CentOS7-Base-163.repo” [1572/1572])


可以看到已经将163的yum源下载下来了。

版权声明:本文内容由互联网用户自发贡献,该文观点与技术仅代表作者本人。本站仅提供信息存储空间服务,不拥有所有权,不承担相关法律责任。如发现本站有涉嫌侵权/违法违规的内容, 请发送邮件至 dio@foxmail.com 举报,一经查实,本站将立刻删除。

相关推荐


linux下开机自启: 在/etc/init.d目录下新建文件elasticsearch 并敲入shell脚本: 注意, 前两行必须填写,且要注释掉。 第一行为shell前行代码,目的告诉系统使用shell。 第二行分别代表运行级别、启动优先权、关闭优先权,且后面添加开机服务会用到。 shell脚本
1、因为在centos7中/etc/rc.d/rc.local的权限被降低了,所以需要赋予其可执行权 chmod +x /etc/rc.d/rc.local 2、赋予脚本可执行权限假设/usr/local/script/autostart.sh是你的脚本路径,给予执行权限 chmod +x /usr
最简单的查看方法可以使用ls -ll、ls-lh命令进行查看,当使用ls -ll,会显示成字节大小,而ls- lh会以KB、MB等为单位进行显示,这样比较直观一些。 通过命令du -h –max-depth=1 *,可以查看当前目录下各文件、文件夹的大小,这个比较实用。 查询当前目录总大小可以使用d
ASP.NET Core应用程序发布linux在shell中运行是正常的。可一但shell关闭网站也就关闭了,所以要配置守护进程, 用的是Supervisor,本文主要记录配置的过程和过程遇到的问题 安装Supervisor 1 yum install python-setuptools
设置时区(CentOS 7) 先执行命令timedatectl status|grep 'Time zone'查看当前时区,如果不是时区(Asia/Shanghai),则需要先设置为中国时区,否则时区不同会存在时差。 #已经是Asia/Shanghai,则无需设置 [root@xia
vim /etc/sysconfig/network-scripts/ifcfg-eth0 BOOTPROTO="static" ONBOOT=yes IPADDR=192.168.8.106 NETMASK=255.255.252.0 GATEWAY=192.168.
一、安装gcc依赖 由于 redis 是用 C 语言开发,安装之前必先确认是否安装 gcc 环境(gcc -v),如果没有安装,执行以下命令进行安装 [root@localhost local]# yum install -y gcc 二、下载并解压安装包 [root@localhost local
第一步 On CentOS/RHEL 6.*: $ sudo rpm -Uvh http://li.nux.ro/download/nux/dextop/el6/x86_64/nux-dextop-release-0-2.el6.nux.noarch.rpm On CentOS/RHEL 7: $
/// <summary> /// 取小写文件名后缀 /// </summary> /// <param name="name">文件名</param> /// <returns>返回小写后缀,不带“.”</ret
which nohup .bash_profile中并source加载 如果没有就安装吧 yum provides */nohup nohup npm run start & nohup ./kibana &
1.1 MySQL安装 1.1.1 下载wget命令 yum -y install wget 1.1.2 在线下载mysql安装包 wget https://dev.mysql.com/get/mysql57-community-release-el7-8.noarch.rpm 1.1.3 安装My
重启 reboot shutdown -r now init 6 关闭 init 0 shutdown -h now shutdown -h 20:25 #8点25关机查看内存 free CPU利用率 top 日期 date 设置时间 date 033017002015 #月日时间年 日历 cal
1、firewalld的基本使用 启动: systemctl start firewalld 关闭: systemctl stop firewalld 查看状态: systemctl status firewalld 开机禁用 : systemctl disable firewalld 开机启用 :
1 下载并安装MySQL官方的 Yum Repository wget -i -c http://dev.mysql.com/get/mysql57-community-release-el7-10.noarch.rpm 使用上面的命令就直接下载了安装用的Yum Repository,大概
CentOS6.x CentOS6中转用Upstrat代替以前的init.d/rcX.d的线性启动方式。 一、相关命令 通过initctl help可以查看相关命令 [root@localhost ~]# initctl help Job commands: start Start job. sto
1、使用命令:df -lk 找到已满磁盘 2、使用命令:du --max-depth=1 -h 查找大文件,删除
ifconfig:查看网卡信息 网卡配置文件位置: /etc/sysconfig/network-scripts/文件夹 nmtui:配置网卡 netstat -tlunp:查看端口信息 端口信息存储位置: /etc/services文件 route:查看路由信息 wget:下载网路文件,例如 wg
ps -ef:查看所有进程, ps -ef |grap firewalld 查看与firewalld相关的进程 which :查看进程:which firewalld kill 进程id:杀掉进程 kill 640,强制杀:kill -9 640 man:查看帮助,例如 man ps 查看
useradd:添加用户 useradd abc,默认添加一个abc组 vipw:查看系统中用户 groupadd:添加组groupadd ccna vigr:查看系统中的组 gpasswd:将用户abc添加到ccna组 gpasswd -a abc ccna groups abc:查看用户abc属